Kernel entry at 0x1001000 ... GDB: no debug ports present KDB: debugger backends: ddb KDB: current backend: ddb Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation.FreeBSD 9.0-CURRENT #167 r+8018f72-dirty: Wed Jan 6 12:34:36 CET 2010 WARNING: WITNESS option enabled, expect reduced performance. WARNING: DIAGNOSTIC option enabled, expect reduced performance. cpu0: Freescale e500v1 core revision 2.0 cpu0: HID0 80004000<EMCP,TBEN> real memory = 250597376 (238 MB) avail memory = 244359168 (233 MB) lbc0: <Freescale Local Bus Controller> cfi0: <AMD/Fujitsu - 8MB> mem 0xff800000-0xffffffff on lbc0 cfi1: <AMD/Fujitsu - 8MB> mem 0xff000000-0xff7fffff on lbc0 rtc0: <Dallas Semiconductor DS1553 RTC> mem 0xf8000000-0xf8007fff on lbc0 rtc0: voltage-low detected. simplebus0: <Flattened device tree simple bus> i2c0: <I2C bus controller> mem 0xfef03000-0xfef030ff irq 59 on simplebus0 iicbus0: <Philips I2C bus> on i2c0 iic0: <I2C generic I/O> on iicbus0 tsec0: <Three-Speed Ethernet Controller> mem 0xfef24000-0xfef24fff irq 45,46,50 on simplebus0 miibus0: <MII bus> on tsec0 ciphy0: <Cicada CS8204 10/100/1000TX PHY> PHY 0 on miibus0 ciphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto tsec0: Ethernet address: 00:01:01:00:85:55 tsec0: [ITHREAD] tsec0: [ITHREAD] tsec0: [ITHREAD] tsec1: <Three-Speed Ethernet Controller> mem 0xfef25000-0xfef25fff irq 51,52,56 on simplebus0 miibus1: <MII bus> on tsec1 ciphy1: <Cicada CS8204 10/100/1000TX PHY> PHY 1 on miibus1 ciphy1: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto tsec1: Ethernet address: 00:01:02:00:85:55 tsec1: [ITHREAD] tsec1: [ITHREAD] tsec1: [ITHREAD] uart0: <16550 or compatible> mem 0xfef04500-0xfef045ff irq 58 on simplebus0 uart0: [FILTER] uart1: <16550 or compatible> mem 0xfef04600-0xfef046ff irq 58 on simplebus0 uart1: [FILTER] uart1: console (115223,n,8,1) sec0: <Freescale Security Engine 2.0> mem 0xfef30000-0xfef3ffff irq 61 on simplebus0 sec0: [ITHREAD] openpic0: <OpenPIC Interrupt Controller> mem 0xfef40000-0xfef7ffff on simplebus0 Timecounter "decrementer" frequency 41250000 Hz quality 0 Timecounters tick every 1.000 msec bootpc_init: wired to interface 'tsec0' Sending DHCP Discover packet from interface tsec0 (00:01:01:00:85:55) tsec0: link state changed to DOWN tsec0: link state changed to UP Received DHCP Offer packet on tsec0 from 0.0.0.0 (accepted) (no root path) Received DHCP Offer packet on tsec0 from 0.0.0.0 (ignored) (no root path) Sending DHCP Request packet from interface tsec0 (00:01:01:00:85:55) Received DHCP Ack packet on tsec0 from 0.0.0.0 (accepted) (got root path) tsec0 at 10.0.0.86 server 0.0.0.0 subnet mask 255.255.0.0 router 10.0.0.1 rootfs 10.0.0.201:/nfsroot/mpc8555cds/ hostname cds Adjusted interface tsec0 tsec0: link state changed to DOWN tsec0: link state changed to UP WARNING: WITNESS option enabled, expect reduced performance. WARNING: DIAGNOSTIC option enabled, expect reduced performance. Trying to mount root from nfs:10.0.0.201:/nfsroot/mpc8555cds/ interface address is missing from cache = 0 in delete NFS ROOT: 10.0.0.201:/nfsroot/mpc8555cds/ tsec0: link state changed to DOWN tsec0: link state changed to UP Invalid time in real time clock. Check and reset the date immediately! Invalid time in real time clock. Check and reset the date immediately! Enter full pathname of shell or RETURN for /bin/sh: #