Building FreeBSD/MIPS for Emulation Targets

FreeBSD/MIPS is able to run in a variety of emulation targets.

Overview

There are two widely used MIPS emulators that FreeBSD supports: QEMU and GXemul. Both of them support numerous MIPS devices but we’re interested in only two.

MALTA is more or less standard for MIPS emulation and supported by both emulators. QEMU supports 32 and 64 bit variants with both big and little-endian byte order. So four modes in total. Also for MALTA machine QEMU provides PCNet NIC emulation.

GXemul supports 32 and 64 bit modes of MALTA but only for little-endian byte order. Big-endian byte order is not supported due to incomplete PCI controller implementation. No NIC support for MALTA machine. Also Gxemul provides so-called oldtestmips emulation mode: generic implementation of abstract MIPS machine with very simplified NIC/disk devices. In theory it should be faster then actual hardware emulation but I haven’t got around to benchmarking yet. oldtestmips can be run in 32 and 64 bit mode, but only big-endian byte order is supported.

Building the system

The first step is ensuring that a useful FreeBSD build for MIPS is ready.

I used raw disk images created by makefs(8) utility. The advantage of raw disk image is that they can be used with both emulators. qemu provides more options in this area but they’re out of scope of this article. I created four images for my tests: disk.img, disk64.img, diskel.img, and disk64el.img. 32-bit big-endian, 64-bit big-endian, 32-bit little-endian, 64-bit big-endian. The process looks somewhat like this script:

 #!/bin/sh
set -e

export TARGET=mips
export TARGET_ARCH=mips
export SRCCONF=/dev/null
export SRCROOT=/src/FreeBSD/head
export MAKEOBJDIRPREFIX=/src/FreeBSD/obj/head
export DESTDIR=/src/FreeBSD/tftproot/$TARGET_ARCH
make -C $SRCROOT buildworld
make -C $SRCROOT -j 4 buildkernel KERNCONF=MALTA

sudo -E mkdir -p /src/FreeBSD/tftproot/$TARGET_ARCH

sudo -E make -C $SRCROOT KERNCONF=$KERNCONF DESTDIR=$DESTDIR installworld
sudo -E make -C $SRCROOT KERNCONF=$KERNCONF DESTDIR=$DESTDIR distribution

# modify /etc/fstab and /etc/rc.conf in $DESTDIR
echo '/dev/ada0 / ufs rw 1 1' > ${DESTDIR}/etc/fstab

# Create 512Mb disk image with big-endian UFS
# For TARGET_ARCH set to mipsel or mips64el use "-B le" switch 
sudo -E makefs -M 538968064 -B be /src/FreeBSD/disk.img $DESTDIR

Change TARGET_ARCH and disk image name accordingly for mipsel/mip64/mips64el targets. The space before #!/bin/sh should be removed; it is a workaround for the wiki parser.

Configuring QEMU

As of QEMU 1.6.0 there is one known problem with it: NIC emulation does not work in big-endian mode. Also, amount of memory limited to 128Mb. Use MALTA kernel config for 32-bit mode and MALTA64 for 64-bit mode. The qemu-devel-1.6.0_1 package is the first revision of the QEMU package with the fixed NIC code.

Command lines for various modes/byte orders are:

qemu-system-mips -M malta -kernel /path/to/mips.mips/MALTA/.../kernel -hda /src/FreeBSD/disk.img -nographic
qemu-system-mips64 -M malta -kernel /path/to/mips.mips64/.../MALTA64/kernel -hda /src/FreeBSD/disk64.img -nographic
qemu-system-mipsel -M malta -kernel /path/to/mips.mipsel/.../MALTA/kernel -hda /src/FreeBSD/diskel.img -nographic
qemu-system-mips64el -M malta -kernel /path/to/mips.mips64el/.../MALTA64/kernel -hda /src/FreeBSD/disk64el.img -nographic

Configuring GXEMUL

GXemul requires two patches for proper FreeBSD/MIPS emulation.

Both of these patches have been committed upstream but there were no GXemul release after that so they’re not available as part of emulators/gxemul port.

As with QEMU kernel configs for MALTA are MALTA and MALTA64. And since only little-endian byte order is supported command lines for this emulation mode are:

gxemul -e malta -C 4Kc -d /home/gonzo/FreeBSD/diskel.img /path/to/mips.mipsel/.../MALTA/kernel
gxemul -e malta -d /home/gonzo/FreeBSD/disk64el.img /path/to/mips.mips64el/.../MALTA64/kernel

For oldtestmips emulation mode is other way around, only big-endian. And to make things more complicated it’s GXEMUL kernel config for 64-bit and GXEMUL32 for 32-bit. So here you are:

gxemul -M 256 -E oldtestmips -d /home/gonzo/FreeBSD/disk64.img /path/to/mips.mips64/.../GXEMUL/kernel
gxemul -M 256 -C 4Kc -E oldtestmips -d /home/gonzo/FreeBSD/disk.img /path/to/mips.mips/.../GXEMUL32/kernel

Maximum amount of memory set could be set by -M command-line switch for oldtestmips emulation is 256M. Otherwise physical memory would overlap with memory-mapped regions reserved by devices. There are some preliminary work to work around this limitation but no results yet.

FreeBSD/MipsEmulation (last edited 2013-10-09 20:32:44 by EdMaste)