Hasee Q540S

Hardware

CPU

Intel Celeron 550

Optical disk drive

Samsung TS-L462D

Installation

In order to boot the installation media it is required to turn on Safe Mode. Otherwise it hangs on run_interrupt_driven_hooks still waiting after 60 seconds for xpt_config (see this post on Super User for more details).

On FreeBSD 11 and higher it is necessary to set hw.vga.textmode in the boot loader(8).

Tested with:

Post-installation tweaks

After installation it is necessary to drop into shell before rebooting and add the following hints to /boot/device.hints:

hint.ata.0.disabled="1"
hint.ata.1.disabled="1"

On FreeBSD 11 and higher it is a good idea to add the following line to /boot/loader.conf:

hw.vga.textmode=1

Files

  • [get | view] (2017-11-29T11:57:58+0000, 200.4 KB) [[attachment:acpidump.out.txt]]
  • [get | view] (2017-11-29T11:59:12+0000, 5.0 KB) [[attachment:devinfo.out.txt]]
  • [get | view] (2017-11-29T11:55:18+0000, 10.2 KB) [[attachment:dmesg.out.txt]]
  • [get | view] (2017-11-29T12:00:36+0000, 2.4 KB) [[attachment:pciconf.out.txt]]
 All files | Selected Files: delete move to page copy to page


CategoryLaptop

Laptops/Hasee_Q540S (last edited 2018-11-01T23:20:16+0000 by MateuszPiotrowski)