1 ubt0: <Broadcom Corp BCM20702A0, rev 2.00/1.12, addr 3> on usbus1
   2 WARNING: attempt to domain_add(bluetooth) after domainfinalize()
   3 WARNING: attempt to domain_add(netgraph) after domainfinalize()
   4 info: [drm] Initialized drm 1.1.0 20060810
   5 drmn0: <Intel SandyBridge (M)> on vgapci0
   6 iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
   7 iic0: <I2C generic I/O> on iicbus0
   8 iic1: <I2C generic I/O> on iicbus1
   9 iicbus2: <Philips I2C bus> on iicbb1 addr 0x0
  10 iic2: <I2C generic I/O> on iicbus2
  11 iic3: <I2C generic I/O> on iicbus3
  12 iicbus4: <Philips I2C bus> on iicbb2 addr 0x0
  13 iic4: <I2C generic I/O> on iicbus4
  14 iic5: <I2C generic I/O> on iicbus5
  15 iicbus6: <Philips I2C bus> on iicbb3 addr 0x0
  16 iic6: <I2C generic I/O> on iicbus6
  17 iic7: <I2C generic I/O> on iicbus7
  18 iicbus8: <Philips I2C bus> on iicbb4 addr 0x0
  19 iic8: <I2C generic I/O> on iicbus8
  20 iic9: <I2C generic I/O> on iicbus9
  21 iicbus10: <Philips I2C bus> on iicbb5 addr 0x0
  22 iic10: <I2C generic I/O> on iicbus10
  23 iic11: <I2C generic I/O> on iicbus11
  24 iicbus12: <Philips I2C bus> on iicbb6 addr 0x0
  25 iic12: <I2C generic I/O> on iicbus12
  26 iic13: <I2C generic I/O> on iicbus13
  27 info: [drm] MSI enabled 1 message(s)
  28 info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
  29 info: [drm] Driver supports precise vblank timestamp query.
  30 drmn0: taking over the fictitious range 0xd0000000-0xe0000000
  31 info: [drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off
  32 info: [drm] Connector LVDS-1: get mode from tunables:
  33 info: [drm]   - kern.vt.fb.modes.LVDS-1
  34 info: [drm]   - kern.vt.fb.default_mode
  35 info: [drm] Connector VGA-1: get mode from tunables:
  36 info: [drm]   - kern.vt.fb.modes.VGA-1
  37 info: [drm]   - kern.vt.fb.default_mode
  38 info: [drm] Connector HDMI-A-1: get mode from tunables:
  39 info: [drm]   - kern.vt.fb.modes.HDMI-A-1
  40 info: [drm]   - kern.vt.fb.default_mode
  41 info: [drm] Connector DP-1: get mode from tunables:
  42 info: [drm]   - kern.vt.fb.modes.DP-1
  43 info: [drm]   - kern.vt.fb.default_mode
  44 fbd0 on drmn0
  45 info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
  46 error: [drm:pid725:gen6_sanitize_pm] *ERROR* Power management discrepancy: GEN6_RP_INTERRUPT_LIMITS expected 17000000, was 12060000
  47 ugen0.2: <LITEON Technology> at usbus0
  48 ukbd0: <EP1 Interrupt> on usbus0
  49 kbd2 at ukbd0
  50 ugen0.3: <Logitech> at usbus0
  51 ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 2> on usbus0
  52 ums0: 3 buttons and [XYZ] coordinates ID=0
  53 error: [drm:pid725:intel_lvds_enable] *ERROR* timed out waiting for panel to power off
  54 Waiting (max 60 seconds) for system process `vnlru' to stop...done
  55 Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
  56 Waiting (max 60 seconds) for system process `syncer' to stop...
  57 Syncing disks, vnodes remaining...8 0 done
  58 All buffers synced.
  59 Copyright (c) 1992-2015 The FreeBSD Project.
  60 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
  61 	The Regents of the University of California. All rights reserved.
  62 FreeBSD is a registered trademark of The FreeBSD Foundation.
  63 FreeBSD 10.2-RELEASE #0 r286666: Wed Aug 12 15:26:37 UTC 2015
  64     root@releng1.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC amd64
  65 FreeBSD clang version 3.4.1 (tags/RELEASE_34/dot1-final 208032) 20140512
  66 CPU: Intel(R) Core(TM) i3-2348M CPU @ 2.30GHz (2294.83-MHz K8-class CPU)
  67   Origin="GenuineIntel"  Id=0x206a7  Family=0x6  Model=0x2a  Stepping=7
  68   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  69   Features2=0x1dbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX>
  70   AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM>
  71   AMD Features2=0x1<LAHF>
  72   XSAVE Features=0x1<XSAVEOPT>
  73   VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  74   TSC: P-state invariant, performance statistics
  75 real memory  = 8589934592 (8192 MB)
  76 avail memory = 8132775936 (7756 MB)
  77 Event timer "LAPIC" quality 600
  78 ACPI APIC Table: <LENOVO CB-01   >
  79 FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
  80 FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
  81  cpu0 (BSP): APIC ID:  0
  82  cpu1 (AP): APIC ID:  1
  83  cpu2 (AP): APIC ID:  2
  84  cpu3 (AP): APIC ID:  3
  85 ioapic0 <Version 2.0> irqs 0-23 on motherboard
  86 random: <Software, Yarrow> initialized
  87 kbd1 at kbdmux0
  88 acpi0: <LENOVO CB-01> on motherboard
  89 acpi0: Power Button (fixed)
  90 cpu0: <ACPI CPU> on acpi0
  91 cpu1: <ACPI CPU> on acpi0
  92 cpu2: <ACPI CPU> on acpi0
  93 cpu3: <ACPI CPU> on acpi0
  94 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
  95 Timecounter "HPET" frequency 14318180 Hz quality 950
  96 Event timer "HPET" frequency 14318180 Hz quality 550
  97 Event timer "HPET1" frequency 14318180 Hz quality 440
  98 Event timer "HPET2" frequency 14318180 Hz quality 440
  99 Event timer "HPET3" frequency 14318180 Hz quality 440
 100 Event timer "HPET4" frequency 14318180 Hz quality 440
 101 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
 102 atrtc0: Warning: Couldn't map I/O.
 103 Event timer "RTC" frequency 32768 Hz quality 0
 104 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
 105 Timecounter "i8254" frequency 1193182 Hz quality 0
 106 Event timer "i8254" frequency 1193182 Hz quality 100
 107 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
 108 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
 109 acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
 110 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 111 pci0: <ACPI PCI bus> on pcib0
 112 vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xe0000000-0xe03fffff,0xd0000000-0xdfffffff irq 16 at device 2.0 on pci0
 113 agp0: <SandyBridge mobile GT2 IG> on vgapci0
 114 agp0: aperture size is 256M, detected 65532k stolen memory
 115 vgapci0: Boot video device
 116 xhci0: <Intel Panther Point USB 3.0 controller> mem 0xe0600000-0xe060ffff at device 20.0 on pci0
 117 xhci0: 32 bytes context size, 64-bit DMA
 118 usbus0: waiting for BIOS to give up control
 119 xhci0: Port routing mask set to 0xffffffff
 120 usbus0 on xhci0
 121 pci0: <simple comms> at device 22.0 (no driver attached)
 122 ehci0: <Intel Panther Point USB 2.0 controller> mem 0xe0619000-0xe06193ff irq 16 at device 26.0 on pci0
 123 usbus1: waiting for BIOS to give up control
 124 usbus1: timed out waiting for BIOS
 125 usbus1: EHCI version 1.0
 126 usbus1 on ehci0
 127 hdac0: <Intel Panther Point HDA Controller> mem 0xe0610000-0xe0613fff irq 22 at device 27.0 on pci0
 128 pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
 129 pci1: <ACPI PCI bus> on pcib1
 130 alc0: <Atheros AR8162 PCIe Fast Ethernet> port 0x2000-0x207f mem 0xe0500000-0xe053ffff irq 16 at device 0.0 on pci1
 131 alc0: 11776 Tx FIFO, 12032 Rx FIFO
 132 alc0: Using 1 MSIX message(s).
 133 miibus0: <MII bus> on alc0
 134 atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
 135 atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
 136 alc0: Using defaults for TSO: 65518/35/2048
 137 alc0: Ethernet address: 20:89:84:34:74:aa
 138 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
 139 pci2: <ACPI PCI bus> on pcib2
 140 pci2: <network> at device 0.0 (no driver attached)
 141 ehci1: <Intel Panther Point USB 2.0 controller> mem 0xe0618000-0xe06183ff irq 23 at device 29.0 on pci0
 142 usbus2: waiting for BIOS to give up control
 143 usbus2: timed out waiting for BIOS
 144 usbus2: EHCI version 1.0
 145 usbus2 on ehci1
 146 isab0: <PCI-ISA bridge> at device 31.0 on pci0
 147 isa0: <ISA bus> on isab0
 148 ahci0: <Intel Panther Point AHCI SATA controller> port 0x3088-0x308f,0x3094-0x3097,0x3080-0x3087,0x3090-0x3093,0x3060-0x307f mem 0xe0617000-0xe06177ff irq 19 at device 31.2 on pci0
 149 ahci0: AHCI v1.30 with 6 6Gbps ports, Port Multiplier not supported
 150 ahcich0: <AHCI channel> at channel 0 on ahci0
 151 ahcich2: <AHCI channel> at channel 2 on ahci0
 152 ahciem0: <AHCI enclosure management bridge> on ahci0
 153 acpi_lid0: <Control Method Lid Switch> on acpi0
 154 acpi_tz0: <Thermal Zone> on acpi0
 155 acpi_button0: <Power Button> on acpi0
 156 acpi_button1: <Sleep Button> on acpi0
 157 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
 158 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 159 kbd0 at atkbd0
 160 atkbd0: [GIANT-LOCKED]
 161 psm0: <PS/2 Mouse> irq 12 on atkbdc0
 162 psm0: [GIANT-LOCKED]
 163 psm0: model Generic PS/2 mouse, device ID 0
 164 battery0: <ACPI Control Method Battery> on acpi0
 165 acpi_acad0: <AC Adapter> on acpi0
 166 orm0: <ISA Option ROM> at iomem 0xc0000-0xcefff on isa0
 167 sc0: <System console> at flags 0x100 on isa0
 168 sc0: VGA <16 virtual consoles, flags=0x300>
 169 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 170 ppc0: cannot reserve I/O port range
 171 est0: <Enhanced SpeedStep Frequency Control> on cpu0
 172 est1: <Enhanced SpeedStep Frequency Control> on cpu1
 173 est2: <Enhanced SpeedStep Frequency Control> on cpu2
 174 est3: <Enhanced SpeedStep Frequency Control> on cpu3
 175 random: unblocking device.
 176 usbus0: 5.0Gbps Super Speed USB v3.0
 177 Timecounters tick every 1.000 msec
 178 hdacc0: <Conexant CX20590 HDA CODEC> at cad 0 on hdac0
 179 hdaa0: <Conexant CX20590 Audio Function Group> at nid 1 on hdacc0
 180 pcm0: <Conexant CX20590 (Analog 2.0+HP/2.0)> at nid 31,25 and 27 on hdaa0
 181 pcm1: <Conexant CX20590 (Right Analog Mic)> at nid 26 on hdaa0
 182 hdacc1: <Intel Panther Point HDA CODEC> at cad 3 on hdac0
 183 hdaa1: <Intel Panther Point Audio Function Group> at nid 1 on hdacc1
 184 pcm2: <Intel Panther Point (HDMI/DP 8ch)> at nid 5 on hdaa1
 185 usbus1: 480Mbps High Speed USB v2.0
 186 usbus2: 480Mbps High Speed USB v2.0
 187 ugen1.1: <Intel> at usbus1
 188 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
 189 ugen0.1: <0x8086> at usbus0
 190 uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
 191 ugen2.1: <Intel> at usbus2
 192 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
 193 ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
 194 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
 195 ses0: SEMB SES Device
 196 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
 197 ada0: <KINGSTON SV300S37A120G 600ABBF0> ATA8-ACS SATA 3.x device
 198 ada0: Serial Number 50026B774C090885
 199 ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
 200 ada0: Command Queueing enabled
 201 ada0: 114473MB (234441648 512 byte sectors: 16H 63S/T 16383C)
 202 ada0: Previously was known as ad4
 203 cd0 at ahcich2 bus 0 scbus1 target 0 lun 0
 204 cd0: <HL-DT-ST DVDRAM GT80N LT21> Removable CD-ROM SCSI device
 205 cd0: Serial Number M8DCB150633
 206 cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
 207 cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
 208 SMP: AP CPU #1 Launched!
 209 SMP: AP CPU #2 Launched!
 210 SMP: AP CPU #3 Launched!
 211 Timecounter "TSC-low" frequency 1147416396 Hz quality 1000
 212 Root mount waiting for: usbus2 usbus1 usbus0
 213 uhub1: 8 ports with 8 removable, self powered
 214 uhub2: 2 ports with 2 removable, self powered
 215 uhub0: 2 ports with 2 removable, self powered
 216 ugen0.2: <Logitech> at usbus0
 217 Root mount waiting for: usbus2 usbus1 usbus0
 218 ugen2.2: <vendor 0x8087> at usbus2
 219 uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus2
 220 ugen0.3: <LITEON Technology> at usbus0
 221 ukbd0: <EP1 Interrupt> on usbus0
 222 kbd2 at ukbd0
 223 ugen1.2: <vendor 0x8087> at usbus1
 224 uhub4: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2> on usbus1
 225 uhub3: 6 ports with 6 removable, self powered
 226 uhub4: 6 ports with 6 removable, self powered
 227 Root mount waiting for: usbus2 usbus1
 228 ugen2.3: <Vimicro Corp.> at usbus2
 229 ugen1.3: <Broadcom Corp> at usbus1
 230 ugen1.4: <Generic> at usbus1
 231 Trying to mount root from ufs:/dev/ada0p2 [rw]...
 232 ugen0.2: <Logitech> at usbus0 (disconnected)
 233 ugen0.2: <Logitech> at usbus0
 234 ugen0.2: <Logitech> at usbus0 (disconnected)
 235 ugen0.2: <Logitech> at usbus0
 236 ums0: <Logitech USB Optical Mouse, class 0/0, rev 2.00/72.00, addr 4> on usbus0
 237 ums0: 3 buttons and [XYZ] coordinates ID=0
 238 ubt0: <Broadcom Corp BCM20702A0, rev 2.00/1.12, addr 3> on usbus1
 239 WARNING: attempt to domain_add(bluetooth) after domainfinalize()
 240 WARNING: attempt to domain_add(netgraph) after domainfinalize()