Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 12.0-CURRENT #1 r330675: Thu Mar  8 19:22:47 EST 2018
    root@pasta.comcast.net:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 6.0.0 (tags/RELEASE_600/final 326565) (based on LLVM 6.0.0)
WARNING: WITNESS option enabled, expect reduced performance.
VT(vga): resolution 640x480
CPU: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz (2808.14-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x906e9  Family=0x6  Model=0x9e  Stepping=9
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33177432064 (31640 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <MSI_NB MEGABOOK>
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: unblocking device.
ioapic0 <Version 2.0> irqs 0-119 on motherboard
SMP: AP CPU #1 Launched!
SMP: AP CPU #7 Launched!
SMP: AP CPU #3 Launched!
SMP: AP CPU #4 Launched!
SMP: AP CPU #5 Launched!
SMP: AP CPU #6 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 1404068127 Hz quality 1000
Cuse v0.1.35 @ /dev/cuse
random: entropy device external interface
[ath_hal] loaded
module_register_init: MOD_LOAD (vesa, 0xffffffff81027130, 0) error 19
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
kbd1 at kbdmux0
netmap: loaded module
nexus0
vtvga0: <VT VGA driver> on motherboard
cryptosoft0: <software crypto> on motherboard
acpi0: <MSI_NB MEGABOOK> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x13, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
cpu4: <ACPI CPU> on acpi0
cpu5: <ACPI CPU> on acpi0
cpu6: <ACPI CPU> on acpi0
cpu7: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xde000000-0xdeffffff,0xc0000000-0xcfffffff,0xd0000000-0xd1ffffff irq 16 at device 0.0 on pci1
vgapci1: <VGA-compatible display> port 0xf000-0xf03f mem 0xdd000000-0xddffffff,0xb0000000-0xbfffffff irq 16 at device 2.0 on pci0
acpi_video1: <ACPI video extension> on vgapci1
vgapci1: Boot video device
xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdf510000-0xdf51ffff irq 16 at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <Intel Sunrise Point AHCI SATA controller> port 0xf090-0xf097,0xf080-0xf083,0xf060-0xf07f mem 0xdf528000-0xdf529fff,0xdf52c000-0xdf52c0ff,0xdf52b000-0xdf52b7ff irq 16 at device 23.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ahciem0: <AHCI enclosure management bridge> on ahci0
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
pci2: <ACPI PCI bus> on pcib2
iwm0: <Intel(R) Dual Band Wireless AC 8265> mem 0xdf400000-0xdf401fff irq 16 at device 0.0 on pci2
pcib3: <ACPI PCI-PCI bridge> irq 19 at device 28.3 on pci0
pci3: <ACPI PCI bus> on pcib3
alc0: <Killer E2500 Gigabit Ethernet> port 0xd000-0xd07f mem 0xdf300000-0xdf33ffff irq 19 at device 0.0 on pci3
alc0: 11776 Tx FIFO, 12032 Rx FIFO
alc0: Using 1 MSIX message(s).
miibus0: <MII bus> on alc0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
alc0: Using defaults for TSO: 65518/35/2048
alc0: Ethernet address: 4c:cc:6a:dd:a4:13
pcib4: <ACPI PCI-PCI bridge> irq 16 at device 28.4 on pci0
pci4: <ACPI PCI bus> on pcib4
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xdf200000-0xdf207fff irq 16 at device 0.0 on pci4
xhci1: 32 bytes context size, 64-bit DMA
xhci1: Unable to map MSI-X table 
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pcib5: <ACPI PCI-PCI bridge> irq 16 at device 29.0 on pci0
pci5: <ACPI PCI bus> on pcib5
nvme0: <Generic NVMe Device> mem 0xdf100000-0xdf103fff irq 16 at device 0.0 on pci5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
pci0: <memory> at device 31.2 (no driver attached)
hdac0: <Intel Kabylake HDA Controller> mem 0xdf520000-0xdf523fff,0xdf500000-0xdf50ffff irq 16 at device 31.3 on pci0
acpi_button0: <Sleep Button> on acpi0
acpi_button1: <Power Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_tz1: <Thermal Zone> on acpi0
acpi_tz2: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcffff,0xd0000-0xd0fff pnpid ORM0000 on isa0
coretemp0: <CPU On-Die Thermal Sensors> on cpu0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
coretemp1: <CPU On-Die Thermal Sensors> on cpu1
est1: <Enhanced SpeedStep Frequency Control> on cpu1
coretemp2: <CPU On-Die Thermal Sensors> on cpu2
est2: <Enhanced SpeedStep Frequency Control> on cpu2
coretemp3: <CPU On-Die Thermal Sensors> on cpu3
est3: <Enhanced SpeedStep Frequency Control> on cpu3
coretemp4: <CPU On-Die Thermal Sensors> on cpu4
est4: <Enhanced SpeedStep Frequency Control> on cpu4
coretemp5: <CPU On-Die Thermal Sensors> on cpu5
est5: <Enhanced SpeedStep Frequency Control> on cpu5
coretemp6: <CPU On-Die Thermal Sensors> on cpu6
est6: <Enhanced SpeedStep Frequency Control> on cpu6
coretemp7: <CPU On-Die Thermal Sensors> on cpu7
est7: <Enhanced SpeedStep Frequency Control> on cpu7
ZFS filesystem version: 5
ZFS storage pool version: features support (5000)
Timecounters tick every 1.000 msec
ugen0.1: <0x8086 XHCI root HUB> at usbus0
ugen1.1: <0x1b21 XHCI root HUB> at usbus1
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
iwm0: hw rev 0x230, fw ver 22.361476.0, address 1c:4d:70:9c:43:7f
nvd0: <Samsung SSD 960 PRO 1TB> NVMe namespace
nvd0: 976762MB (2000409264 512 byte sectors)
ada0 at ahcich3 bus 0 scbus1 target 0 lun 0
ada0: <HGST HTS721010A9E630 JB0OA3U0> ATA8-ACS SATA 3.x device
ada0: Serial Number JS100X620NLTMS
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
hdacc0: cd0 at ahcich2 bus 0 scbus0 target 0 lun 0
cd0: <MATSHITA BD-MLT UJ272 1.01> Removable CD-ROM SCSI device
cd0: Serial Number WR55 491968
cd0: 150.000MB/s transfers (SATA 1.x, UDMA6, ATAPI 12bytes, PIO 8192bytes)
cd0: 402MB (205972 2048 byte sectors)
<Realtek ALC899 HDA CODEC>ses0 at ahciem0 bus 0 scbus2 target 0 lun 0
ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
ses0: SEMB SES Device
 at cad 0 on hdac0
hdaa0: <Realtek ALC899 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC899 (Rear Analog)> at nid 20 and 24 on hdaa0
pcm1: <Realtek ALC899 (Internal Analog Speaker)> at nid 21 on hdaa0
pcm2: <Realtek ALC899 (Internal Analog Speaker)> at nid 26 on hdaa0
pcm3: <Realtek ALC899 (Internal Analog Speaker)> at nid 27 on hdaa0
pcm4: <Realtek ALC899 (Rear Digital)> at nid 30 on hdaa0
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from zfs:zroot/ROOT/default []...
uhub1: 4 ports with 4 removable, self powered
uhub0: 24 ports with 24 removable, self powered
ugen0.2: <vendor 0x1770 product 0xff00> at usbus0
hid_get_item: Number of items(256) truncated to 255
ugen0.3: <vendor 0x8087 product 0x0a2b> at usbus0
ugen0.4: <Bison BisonCam, NB Pro> at usbus0
ugen0.5: <Generic USB2.0-CRW> at usbus0
hid_get_item: Number of items(256) truncated to 255
anon_inodefs_init: 
drmn1: <drmn> on vgapci1
vgapci1: child drmn1 requested pci_enable_io
vgapci1: child drmn1 requested pci_enable_io
[drm] Memory usable by graphics device = 4096M
Failed to add WC MTRR for [0xb0000000-0xbfffffff]: -22; performance may suffer
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
[drm] DMC: load work fn start
i915/kbl_dmc_ver1_01.bin: could not load firmware image, error 2
[drm] Connector eDP-1: get mode from tunables:
[drm]   - kern.vt.fb.modes.eDP-1
[drm]   - kern.vt.fb.default_mode
i915/kbl_huc_ver02_00_1810.bin: could not load firmware image, error 2
i915/kbl_dmc_ver1_01.bin: could not load firmware image, error 2
i915/kbl_huc_ver02_00_1810.bin: could not load firmware image, error 2
[drm] Finished loading DMC firmware i915/kbl_dmc_ver1_01.bin (v1.1)
[drm] DMC: load work fn end
[drm] GuC firmware load skipped
[drm] Initialized i915 1.6.0 20170123 for drmn1 on minor 0
VT: Replacing driver "vga" with new "fb".
start FB_INFO:
type=11 height=1080 width=1920 depth=32
cmsize=16 size=8294400
pbase=0xb0040000 vbase=0xfffff800b0040000
name=drmn1 flags=0x0 stride=7680 bpp=32
cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
end FB_INFO
drmn1: fb0: inteldrmfb frame buffer device
wlan0: Ethernet address: 1c:4d:70:9c:43:7f
alc0: link state changed to DOWN
[drm] RC6 on
wlan0: link state changed to UP
hid_get_item: Number of items(256) truncated to 255
uhid0 on uhub0
uhid0: <vendor 0x1770 product 0xff00, class 0/0, rev 1.10/1.10, addr 1> on usbus0
hid_get_item: Number of items(256) truncated to 255
hid_get_item: Number of items(256) truncated to 255
hid_get_item: Number of items(256) truncated to 255
ubt0 on uhub0
ubt0: <vendor 0x8087 product 0x0a2b, class 224/1, rev 2.00/0.10, addr 2> on usbus0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
WARNING: attempt to domain_add(netgraph) after domainfinalize()
ubt0: ubt_ctrl_write_callback:782: control transfer failed: USB_ERR_TIMEOUT
ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout