---<<BOOT>>---
Copyright (c) 1992-2023 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-STABLE #0 stable/14-13952fbca7: Sat Apr  6 10:29:25 BST 2024
    patrizia@laptopbsd:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 17.0.6 (https://github.com/llvm/llvm-project.git llvmorg-17.0.6-0-g6009708b4367)
VT(efifb): resolution 1920x1080
CPU: AMD Ryzen 7 6800U with Radeon Graphics          (2695.04-MHz K8-class CPU)
  Origin="AuthenticAMD"  Id=0xa40f41  Family=0x19  Model=0x44  Stepping=1
  Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x7ef8320b<SSE3,PCLMULQDQ,MON,SSSE3,FMA,CX16,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2e500800<SYSCALL,NX,MMX+,FFXSR,Page1GB,RDTSCP,LM>
  AMD Features2=0x75c237ff<LAHF,CMP,SVM,ExtAPIC,CR8,ABM,SSE4A,MAS,Prefetch,OSVW,IBS,SKINIT,WDT,TCE,Topology,PCXC,PNXC,DBE,PL2I,MWAITX,ADMSKX>
  Structured Extended Features=0x219c97a9<FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,PQM,PQE,RDSEED,ADX,SMAP,CLFLUSHOPT,CLWB,SHA>
  Structured Extended Features2=0x40069c<UMIP,PKU,OSPKE,VAES,VPCLMULQDQ,RDPID>
  Structured Extended Features3=0x10<FSRM>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  AMD Extended Feature Extensions ID EBX=0x191ef657<CLZERO,IRPerf,XSaveErPtr,RDPRU,WBNOINVD,IBPB,IBRS,STIBP,STIBP_ALWAYSON,PREFER_IBRS,SSBD>
  SVM: NP,NRIP,VClean,AFlush,DAssist,NAsids=32768
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 32574517248 (31065 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <ALASKA A M I >
FreeBSD/SMP: Multiprocessor System Detected: 16 CPUs
FreeBSD/SMP: 1 package(s) x 8 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
random: unblocking device.
ioapic0 <Version 2.1> irqs 0-23
ioapic1 <Version 2.1> irqs 24-55
Launching APs: 1 9 8 13 12 6 7 4 5 3 2 11 10 15 14
random: entropy device external interface
kbd1 at kbdmux0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
smbios0: <System Management BIOS> at iomem 0xd91c3000-0xd91c301e
smbios0: Version: 3.4, BCD Revision: 3.4
aesni0: <AES-CBC,AES-CCM,AES-GCM,AES-ICM,AES-XTS,SHA1,SHA256>
acpi0: <ALASKA A M I >
Firmware Error (ACPI): Could not resolve symbol [\134_SB.PCI0.GPP2.WWAN], AE_NOT_FOUND (20221020/dswload2-315)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372)
Firmware Error (ACPI): Could not resolve symbol [\134_SB.PCI0.GPP6.WLAN], AE_NOT_FOUND (20221020/dswload2-315)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372)
Firmware Error (ACPI): Could not resolve symbol [\134_SB.PCI0.GPP7.DEV0], AE_NOT_FOUND (20221020/dswload2-315)
ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20221020/psobject-372)
ACPI Error: No handler for Region [ECF2] (0xfffff80001ed5e80) [EmbeddedControl] (20221020/evregion-292)
ACPI Error: Region EmbeddedControl (ID=3) has no handler (20221020/exfldio-428)
ACPI Error: Aborting method \134_SB.PCI0.SBRG.H_EC.BAT0._STA due to previous error (AE_NOT_EXIST) (20221020/psparse-689)
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 on acpi0
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 350
Event timer "HPET1" frequency 14318180 Hz quality 350
Event timer "HPET2" frequency 14318180 Hz quality 350
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <32-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x5> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
pci0: <base peripheral, IOMMU> at device 0.2 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 1.2 on pci0
pci1: <ACPI PCI bus> on pcib1
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xf000-0xf0ff mem 0xfcf04000-0xfcf04fff,0xfcf00000-0xfcf03fff at device 0.0 on pci1
re0: Using 1 MSI-X message
re0: turning off MSI enable bit.
re0: ASPM disabled
re0: Chip rev. 0x54000000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 50:a1:32:2a:fb:94
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib2: <ACPI PCI-PCI bridge> at device 1.3 on pci0
pci2: <ACPI PCI bus> on pcib2
pci2: <network> at device 0.0 (no driver attached)
pcib3: <ACPI PCI-PCI bridge> at device 2.1 on pci0
pci3: <ACPI PCI bus> on pcib3
nvme0: <Generic NVMe Device> mem 0xfcd00000-0xfcd03fff at device 0.0 on pci3
pcib4: <ACPI PCI-PCI bridge> at device 2.2 on pci0
pci4: <ACPI PCI bus> on pcib4
nvme1: <Generic NVMe Device> mem 0xfcc00000-0xfcc03fff at device 0.0 on pci4
pcib5: <ACPI PCI-PCI bridge> at device 8.1 on pci0
pci5: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> port 0xe000-0xe0ff mem 0x7fe0000000-0x7fefffffff,0x7ff0000000-0x7ff01fffff,0xfc800000-0xfc87ffff at device 0.0 on pci5
hdac0: <ATI (0x1640) HDA Controller> mem 0xfc8c8000-0xfc8cbfff at device 0.1 on pci5
pci5: <encrypt/decrypt> at device 0.2 (no driver attached)
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xfc600000-0xfc6fffff at device 0.3 on pci5
xhci0: 64 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xfc500000-0xfc5fffff at device 0.4 on pci5
xhci1: 64 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pci5: <multimedia> at device 0.5 (no driver attached)
hdac1: <AMD Raven HDA Controller> mem 0xfc8c0000-0xfc8c7fff at device 0.6 on pci5
pcib6: <ACPI PCI-PCI bridge> at device 8.3 on pci0
pci6: <ACPI PCI bus> on pcib6
xhci2: <XHCI (generic) USB 3.0 controller> mem 0xfcb00000-0xfcbfffff at device 0.0 on pci6
xhci2: 64 bytes context size, 64-bit DMA
usbus2 on xhci2
usbus2: 5.0Gbps Super Speed USB v3.0
xhci3: <XHCI (generic) USB 3.0 controller> mem 0xfca00000-0xfcafffff at device 0.3 on pci6
xhci3: 64 bytes context size, 64-bit DMA
usbus3 on xhci3
usbus3: 5.0Gbps Super Speed USB v3.0
xhci4: <XHCI (generic) USB 3.0 controller> mem 0xfc900000-0xfc9fffff at device 0.4 on pci6
xhci4: 64 bytes context size, 64-bit DMA
usbus4 on xhci4
usbus4: 5.0Gbps Super Speed USB v3.0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
acpi_button0: <Power Button> on acpi0
acpi_syscontainer0: <System Container> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
cpu0: <ACPI CPU> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
Timecounter "TSC-low" frequency 1347467055 Hz quality 1000
Timecounters tick every 1.000 msec
ugen0.1: <AMD XHCI root HUB> at usbus0
ugen1.1: <AMD XHCI root HUB> at usbus1
ugen2.1: <AMD XHCI root HUB> at usbus2
ugen4.1: <AMD XHCI root HUB> at usbus4
ugen3.1: <AMD XHCI root HUB> at usbus3
uhub0 on usbus0
uhub0: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
uhub1 on usbus4
uhub1: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus4
uhub2 on usbus3
uhub2: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus3
ZFS filesystem version: 5
uhub3 on usbus2
uhub3: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus2
uhub4 on usbus1
uhub4: <AMD XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ZFS storage pool version: features support (5000)
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Conexant (0x20d0) HDA CODEC> at cad 0 on hdac1
hdaa1: <Conexant (0x20d0) Audio Function Group> at nid 1 on hdacc1
pcm1: <Conexant (0x20d0) (Analog)> at nid 23 and 25 on hdaa1
pcm2: <Conexant (0x20d0) (Left Analog Headphones)> at nid 22 on hdaa1
nda0 at nvme0 bus 0 scbus0 target 0 lun 1
nda0: <Samsung SSD 980 PRO 2TB 5B2QGXA7 S6B0NL0W408068W>
nda0: Serial Number S6B0NL0W408068W
nda0: nvme version 1.3
nda0: 1907729MB (3907029168 512 byte sectors)
nda1 at nvme1 bus 0 scbus1 target 0 lun 1
nda1: <XPG GAMMIX S70 BLADE 3.2.F.83 2N282LQSEQP7>
nda1: Serial Number 2N282LQSEQP7
nda1: nvme version 1.4
nda1: 1953514MB (4000797360 512 byte sectors)
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
Trying to mount root from zfs:zroot/ROOT/default []...
uhub3: 1 port with 1 removable, self powered
uhub4: 5 ports with 5 removable, self powered
uhub0: 6 ports with 6 removable, self powered
ugen1.2: <vendor 0x8087 product 0x0032> at usbus1
ugen0.2: <Focal-systems.Corp FT9201Fingerprint.> at usbus0
[drm] amdgpu kernel modesetting enabled.
drmn0: <drmn> on vgapci0
vgapci0: child drmn0 requested pci_enable_io
vgapci0: child drmn0 requested pci_enable_io
[drm] initializing kernel modesetting (YELLOW_CARP 0x1002:0x1681 0x2782:0x12B3 0xC1).
[drm] register mmio base: 0xFC800000
[drm] register mmio size: 524288
[drm] add ip block number 0 <nv_common>
[drm] add ip block number 1 <gmc_v10_0>
[drm] add ip block number 2 <navi10_ih>
[drm] add ip block number 3 <psp>
[drm] add ip block number 4 <smu>
[drm] add ip block number 5 <dm>
[drm] add ip block number 6 <gfx_v10_0>
[drm] add ip block number 7 <sdma_v5_2>
[drm] add ip block number 8 <vcn_v3_0>
[drm] add ip block number 9 <jpeg_v3_0>
drmn0: Fetched VBIOS from VFCT
amdgpu: ATOM BIOS: 113-REMBRANDT-X37
[drm] VCN(0) decode is enabled in VM mode
[drm] VCN(0) encode is enabled in VM mode
[drm] JPEG decode is enabled in VM mode
drmn0: Trusted Memory Zone (TMZ) feature disabled as experimental (default)
drmn0: PCIE atomic ops is not supported
[drm] vm size is 262144 GB, 4 levels, block size is 9-bit, fragment size is 9-bit
drmn0: VRAM: 512M 0x000000F400000000 - 0x000000F41FFFFFFF (512M used)
drmn0: GART: 1024M 0x0000000000000000 - 0x000000003FFFFFFF
drmn0: AGP: 267419648M 0x000000F800000000 - 0x0000FFFFFFFFFFFF
[drm ERROR :amdgpu_bo_init] Unable to set WC memtype for the aperture base
[drm] Detected VRAM RAM=512M, BAR=512M
[drm] RAM width 256bits LPDDR5
[drm] amdgpu: 512M of VRAM memory ready
[drm] amdgpu: 15977M of GTT memory ready.
[drm] GART: num cpu pages 262144, num gpu pages 262144
[drm] PCIE GART of 1024M enabled (table at 0x000000F41FC00000).
drmn0: successfully loaded firmware image 'amdgpu/yellow_carp_toc.bin'
drmn0: successfully loaded firmware image 'amdgpu/yellow_carp_ta.bin'
drmn0: PSP runtime database doesn't exist
drmn0: PSP runtime database doesn't exist
drmn0: successfully loaded firmware image 'amdgpu/yellow_carp_dmcub.bin'
[drm] Loading DMUB firmware via PSP: version=0x0400003C
drmn0: successfully loaded firmware image 'amdgpu/yellow_carp_pfp.bin'
drmn0: successfully loaded firmware image 'amdgpu/yellow_carp_me.bin'
drmn0: successfully loaded firmware image 'amdgpu/yellow_carp_ce.bin'
drmn0: successfully loaded firmware image 'amdgpu/yellow_carp_rlc.bin'
drmn0: successfully loaded firmware image 'amdgpu/yellow_carp_mec.bin'
drmn0: successfully loaded firmware image 'amdgpu/yellow_carp_mec2.bin'
drmn0: successfully loaded firmware image 'amdgpu/yellow_carp_sdma.bin'
[drm] use_doorbell being set to: [true]
drmn0: successfully loaded firmware image 'amdgpu/yellow_carp_vcn.bin'
[drm] Found VCN firmware Version ENC: 1.27 DEC: 2 VEP: 0 Revision: 0
drmn0: Will use PSP to load VCN firmware
[drm] reserve 0xa00000 from 0xf41e000000 for PSP TMR
drmn0: RAS: optional ras ta ucode is not available
drmn0: RAP: optional rap ta ucode is not available
drmn0: SECUREDISPLAY: securedisplay ta ucode is not available
drmn0: SMU is initialized successfully!
[drm] Display Core initialized with v3.2.207!
[drm] DMUB hardware initialized: version=0x0400003C
lkpi_iic0: <LinuxKPI I2C> on drmn0
iicbus0: <Philips I2C bus> on lkpi_iic0
iic0: <I2C generic I/O> on iicbus0
[drm] PSR support 1, DC PSR ver 0, sink PSR ver 1 DPCD caps 0x0 su_y_granularity 0
lkpi_iic1: <LinuxKPI I2C> on drmn0
iicbus1: <Philips I2C bus> on lkpi_iic1
iic1: <I2C generic I/O> on iicbus1
lkpi_iic2: <LinuxKPI I2C> on drmn0
iicbus2: <Philips I2C bus> on lkpi_iic2
iic2: <I2C generic I/O> on iicbus2
lkpi_iic3: <LinuxKPI I2C> on drmn0
iicbus3: <Philips I2C bus> on lkpi_iic3
iic3: <I2C generic I/O> on iicbus3
lkpi_iic4: <LinuxKPI I2C> on drmn0
iicbus4: <Philips I2C bus> on lkpi_iic4
iic4: <I2C generic I/O> on iicbus4
lkpi_iic5: <LinuxKPI I2C> on drmn0
iicbus5: <Philips I2C bus> on lkpi_iic5
iic5: <I2C generic I/O> on iicbus5
lkpi_iic6: <LinuxKPI I2C> on drmn0
iicbus6: <Philips I2C bus> on lkpi_iic6
iic6: <I2C generic I/O> on iicbus6
lkpi_iic7: <LinuxKPI I2C> on drmn0
iicbus7: <Philips I2C bus> on lkpi_iic7
iic7: <I2C generic I/O> on iicbus7
lkpi_iic8: <LinuxKPI I2C> on drmn0
iicbus8: <Philips I2C bus> on lkpi_iic8
iic8: <I2C generic I/O> on iicbus8
[drm] kiq ring mec 2 pipe 1 q 0
[drm] VCN decode and encode initialized successfully(under DPG Mode).
[drm] JPEG decode initialized successfully.
drmn0: SE 1, SH per SE 2, CU per SH 6, active_cu_number 12
drmn0: ring gfx_0.0.0 uses VM inv eng 0 on hub 0
drmn0: ring comp_1.0.0 uses VM inv eng 1 on hub 0
drmn0: ring comp_1.1.0 uses VM inv eng 4 on hub 0
drmn0: ring comp_1.2.0 uses VM inv eng 5 on hub 0
drmn0: ring comp_1.3.0 uses VM inv eng 6 on hub 0
drmn0: ring comp_1.0.1 uses VM inv eng 7 on hub 0
drmn0: ring comp_1.1.1 uses VM inv eng 8 on hub 0
drmn0: ring comp_1.2.1 uses VM inv eng 9 on hub 0
drmn0: ring comp_1.3.1 uses VM inv eng 10 on hub 0
drmn0: ring kiq_2.1.0 uses VM inv eng 11 on hub 0
drmn0: ring sdma0 uses VM inv eng 12 on hub 0
drmn0: ring vcn_dec_0 uses VM inv eng 0 on hub 1
drmn0: ring vcn_enc_0.0 uses VM inv eng 1 on hub 1
drmn0: ring vcn_enc_0.1 uses VM inv eng 4 on hub 1
drmn0: ring jpeg_dec uses VM inv eng 5 on hub 1
vgapci0: child drmn0 requested pci_get_powerstate
sysctl_warn_reuse: can't re-use a leaf (hw.dri.debug)!
lkpi_iic9: <LinuxKPI I2C> on drm1
iicbus9: <Philips I2C bus> on lkpi_iic9
iic9: <I2C generic I/O> on iicbus9
lkpi_iic10: <LinuxKPI I2C> on drm3
iicbus10: <Philips I2C bus> on lkpi_iic10
iic10: <I2C generic I/O> on iicbus10
lkpi_iic11: <LinuxKPI I2C> on drm4
iicbus11: <Philips I2C bus> on lkpi_iic11
iic11: <I2C generic I/O> on iicbus11
lkpi_iic12: <LinuxKPI I2C> on drm5
iicbus12: <Philips I2C bus> on lkpi_iic12
iic12: <I2C generic I/O> on iicbus12
lkpi_iic13: <LinuxKPI I2C> on drm6
iicbus13: <Philips I2C bus> on lkpi_iic13
iic13: <I2C generic I/O> on iicbus13
lkpi_iic14: <LinuxKPI I2C> on drm7
iicbus14: <Philips I2C bus> on lkpi_iic14
iic14: <I2C generic I/O> on iicbus14
lkpi_iic15: <LinuxKPI I2C> on drm8
iicbus15: <Philips I2C bus> on lkpi_iic15
iic15: <I2C generic I/O> on iicbus15
lkpi_iic16: <LinuxKPI I2C> on drm9
iicbus16: <Philips I2C bus> on lkpi_iic16
iic16: <I2C generic I/O> on iicbus16
[drm] Initialized amdgpu 3.49.0 20150101 for drmn0 on minor 0
VT: Replacing driver "efifb" with new "drmfb".
[drm] DSC precompute is not needed.
start FB_INFO:
height=1080 width=1920 depth=32
pbase=0x0 vbase=0xfffffe01ae800000
name=drmn0 id=amdgpudrmfb flags=0x0 stride=7680
end FB_INFO
Intel(R) Wireless WiFi based driver for FreeBSD
intsmb0: <AMD FCH SMBus Controller> at device 20.0 on pci0
intsmb0: Could not allocate I/O space
device_attach: intsmb0 attach returned 6
iwlwifi0: <iwlwifi> mem 0xfce00000-0xfce03fff at device 0.0 on pci2
iwlwifi0: Detected crf-id 0x400410, cnv-id 0x400410 wfpm id 0x80000000
iwlwifi0: PCI dev 2725/0024, rev=0x420, rfid=0x10d000
iwlwifi0: successfully loaded firmware image 'iwlwifi-ty-a0-gf-a0-83.ucode'
iwlwifi0: api flags index 2 larger than supported by driver
iwlwifi0: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.0.2.41
iwlwifi0: loaded firmware version 83.e8f84e98.0 ty-a0-gf-a0-83.ucode op_mode iwlmvm
iwlwifi0: Detected Intel(R) Wi-Fi 6 AX210 160MHz, REV=0x420
iwlwifi0: WRT: Invalid buffer destination: 0
iwlwifi0: WFPM_UMAC_PD_NOTIFICATION: 0x20
iwlwifi0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
iwlwifi0: WFPM_AUTH_KEY_0: 0x90
iwlwifi0: CNVI_SCU_SEQ_DATA_DW9: 0x0
iwlwifi0: successfully loaded firmware image 'iwlwifi-ty-a0-gf-a0.pnvm'
iwlwifi0: loaded PNVM version 181407b3
iwlwifi0: Detected RF GF, rfid=0x10d000
iwlwifi0: base HW address: 70:1a:b8:96:f2:12
intsmb0: <AMD FCH SMBus Controller> port 0xff00-0xff0f at device 20.0 on pci0
intsmb0: Could not allocate I/O space
device_attach: intsmb0 attach returned 6
intsmb0: <AMD FCH SMBus Controller> port 0xff00-0xff0f at device 20.0 on pci0
intsmb0: Could not allocate I/O space
device_attach: intsmb0 attach returned 6
intsmb0: <AMD FCH SMBus Controller> port 0xff00-0xff0f at device 20.0 on pci0
intsmb0: Could not allocate I/O space
device_attach: intsmb0 attach returned 6
driver bug: Unable to set devclass (class: ppc devname: (unknown))
ig4iic0: <Designware I2C Controller> iomem 0xfedc5000-0xfedc5fff irq 6 on acpi0
iicbus17: <Philips I2C bus (ACPI-hinted)> on ig4iic0
iicbus17: <unknown card> at addr 0x2c
iic17: <I2C generic I/O> on iicbus17
acpi_wmi0: <ACPI-WMI mapping> on acpi0
acpi_wmi0: Embedded MOF found
ACPI: \134_SB.WMI.WQMO: 1 arguments were passed to a non-method ACPI object (Buffer) (20221020/nsarguments-361)
driver bug: Unable to set devclass (class: ppc devname: (unknown))
iwlwifi0: WRT: Invalid buffer destination: 0
iwlwifi0: WFPM_UMAC_PD_NOTIFICATION: 0x20
iwlwifi0: WFPM_LMAC2_PD_NOTIFICATION: 0x1f
iwlwifi0: WFPM_AUTH_KEY_0: 0x90
iwlwifi0: CNVI_SCU_SEQ_DATA_DW9: 0x0
wlan0: Ethernet address: 70:1a:b8:96:f2:12
re0: link state changed to DOWN
lo0: link state changed to UP
Cuse v0.1.37 @ /dev/cuse
iichid0: <PNP0C50:08 0911:5288 I2C HID device> at addr 0x2c on iicbus17
iichid0: Interrupt setup failed. Fallback to sampling
hidbus0: <HID bus> on iichid0
hms0: <PNP0C50:08 0911:5288 Mouse> on hidbus0
hms0: 3 buttons and [XYW] coordinates ID=1
hmt0: <PNP0C50:08 0911:5288 TouchPad> on hidbus0
hconf0: <PNP0C50:08 0911:5288 Configuration> on hidbus0
hmt0: Multitouch touchpad with 2 external buttons, click-pad
hmt0: 5 contacts with [C] properties. Report range [0:0] - [1611:1000]
wlan0: link state changed to UP