---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RELEASE-p10 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz (2693.83-MHz K8-class CPU) Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 7956549632 (7587 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <LENOVO TP-GJ > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads FreeBSD/SMP Online: 1 package(s) x 2 core(s) random: unblocking device. ioapic0 <Version 2.0> irqs 0-39 on motherboard Launching APs: 1 Timecounter "TSC-low" frequency 1346914880 Hz quality 1000 random: entropy device external interface netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810f9a00, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" kbd1 at kbdmux0 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard acpi0: <LENOVO TP-GJ> on motherboard acpi_ec0: <Embedded Controller: GPE 0x25, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 Event timer "HPET5" frequency 14318180 Hz quality 440 Event timer "HPET6" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device hdac0: <Intel Haswell HDA Controller> mem 0xf0630000-0xf0633fff irq 16 at device 3.0 on pci0 xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf0620000-0xf062ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection> port 0x3080-0x309f mem 0xf0600000-0xf061ffff,0xf063e000-0xf063efff irq 20 at device 25.0 on pci0 em0: attach_pre capping queues at 1 em0: using 1024 tx descriptors and 1024 rx descriptors em0: msix_init qsets capped at 1 em0: Unable to map MSIX table em0: Using an MSI interrupt em0: allocated for 1 tx_queues em0: allocated for 1 rx_queues em0: Ethernet address: 68:f7:28:61:fc:23 em0: netmap queues/slots: TX 1/1024, RX 1/1024 hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xf0634000-0xf0637fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <unknown> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.1 on pci0 pci2: <ACPI PCI bus> on pcib2 iwm0: <Intel(R) Dual Band Wireless AC 7260> mem 0xf0400000-0xf0401fff irq 17 at device 0.0 on pci2 ehci0: <Intel Lynx Point LP USB 2.0 controller USB> mem 0xf063d000-0xf063d3ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x30a8-0x30af,0x30b4-0x30b7,0x30a0-0x30a7,0x30b0-0x30b3,0x3060-0x307f mem 0xf063c000-0xf063c7ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 3 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz0: _CRT value is absurd, ignored (200.1C) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 fuse-freebsd: version 0.4.4, FUSE ABI 7.8 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 hdacc1: <Realtek ALC292 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC292 Audio Function Group> at nid 1 on hdacc1 pcm1: <Realtek ALC292 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa1 pcm2: <Realtek ALC292 (Internal Analog Mic)> at nid 18 on hdaa1 ugen1.1: <Intel EHCI root HUB> at usbus1 ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <KINGSTON SUV500480G 003056RI> ACS-4 ATA SATA 3.x device ada0: Serial Number 50026B7682C95A8B ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 457862MB (937703088 512 byte sectors) iwm0: hw rev 0x140, fw ver 17.352738.0, address e8:b1:fc:95:42:7d GEOM_MIRROR: Device mirror/swap launched (1/1). Trying to mount root from zfs:zroot/ROOT/default []... GEOM_ELI: Device ada0p3.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware Root mount waiting for: usbus1 usbus0 uhub1: 13 ports with 13 removable, self powered Root mount waiting for: usbus1 usbus0 uhub0: 3 ports with 3 removable, self powered ugen0.2: <Sierra Wireless Inc. Sierra Wireless EM7345 4G LTE> at usbus0 Root mount waiting for: usbus1 usbus0 ugen0.3: <vendor 0x138a product 0x0017> at usbus0 ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 uhub2 on uhub0 uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 uhub2: 8 ports with 8 removable, self powered ugen0.4: <vendor 0x8087 product 0x07dc> at usbus0 ugen0.5: <J30E9S6SB Integrated Camera> at usbus0 Setting hostuuid: 01651626-8750-cb11-ab38-d0e864e39930. Setting hostid: 0x37b3bdee. Starting file system checks: Mounting local filesystems:. ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat /usr/local/lib/gcc9 /usr/local/lib/mysql /usr/local/lib/nss /usr/local/lib/opencollada /usr/local/lib/perl5/5.28/mach/CORE /usr/local/lib/qt5 /usr/local/lib/qtcreator /usr/local/lib/samba4 /usr/local/lib/samba4/private /usr/local/llvm60/lib /usr/local/llvm80/lib /usr/local/share/chromium /usr/local/share/electron 32-bit compatibility ldconfig path: /usr/lib32 /usr/local/lib32/compat Additional TCP/IP options: log_in_vain=1 drop SYN+FIN packets=YES. Setting up harvesting: PURE_RDRAND,[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED Feeding entropy: . wlan0: Ethernet address: e8:b1:fc:95:42:7d Created wlan(4) interfaces: wlan0. lo0: link state changed to UP Starting wpa_supplicant. Starting Network: lo0 em0 wlan0. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet 127.0.0.1 netmask 0xff000000 groups: lo nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=81249b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LRO,WOL_MAGIC,VLAN_HWFILTER> ether 68:f7:28:61:fc:23 media: Ethernet autoselect status: no carrier nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether e8:b1:fc:95:42:7d groups: wlan ssid "" channel 1 (2412 MHz 11g) regdomain ETSI country CZ authmode WPA1+WPA2/802.11i privacy MIXED deftxkey UNDEF txpower 30 bmiss 10 scanvalid 60 protmode CTS wme roaming MANUAL bintval 0 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> Starting devd. Autoloading module: if_cdce.ko cdce0 on uhub1 cdce0: <Sierra Wireless EM7345 4G LTE (NCM)> on usbus0 ue0: <USB Ethernet> on cdce0 ue0: Ethernet address: ff:ff:ff:ff:ff:ff Autoloading module: umodem.ko umodem0 on uhub1 umodem0: <Sierra Wireless EM7345 4G LTE> on usbus0 umodem0: data interface 3, has no CM over data, has break Autoloading module: ng_ubt.ko ubt0 on uhub1 ubt0: <vendor 0x8087 product 0x07dc, class 224/1, rev 2.00/0.01, addr 3> on usbus0 Autoloading module: ng_ubt.ko Starting Network: ue0. ue0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether ff:ff:ff:ff:ff:ff nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> wlan0: link state changed to UP Autoloading module: umodem.ko Autoloading module: ng_ubt.ko Autoloading module: ng_ubt.ko Autoloading module: ng_ubt.ko Autoloading module: ng_ubt.ko WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize() Starting dhclient. DHCPREQUEST on wlan0 to 255.255.255.255 port 67 DHCPACK from 192.168.88.1 bound to 192.168.88.169 -- renewal in 21600 seconds. Starting pflog. pflog0: promiscuous mode enabled 2019-08-30T15:05:38.449581+02:00 pflogd 7388 - - [priv]: msg PRIV_OPEN_LOG received Enabling pf. add host 127.0.0.1: gateway lo0 fib 0: route already in table Additional inet routing options: ignore ICMP redirect=YES log ICMP redirect=YES. add host ::1: gateway lo0 fib 0: route already in table add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 Creating and/or trimming log files. Starting syslogd. No core dumps found. Clearing /tmp. Updating motd:. Mounting late filesystems:. Starting powerd. Starting default moused. Starting dbus. Starting hald. Starting slim. mate-session - MATE mate-session - MATE Configuring vt: blanktime. Starting cron. Starting background file system checks in 60 seconds. Fri Aug 30 15:05:40 CEST 2019 info: [drm] Initialized drm 1.1.0 20060810 drmn0: ======================================================= drmn0: This code is obsolete abandonware. Install the graphics/drm-legacy-kmod pkg drmn0: ======================================================= drmn0: Deprecated code (to be removed in FreeBSD 13): drm2 drivers drmn0: ======================================================= drmn0: This code is obsolete abandonware. Install the graphics/drm-legacy-kmod pkg drmn0: ======================================================= drmn0: Deprecated code (to be removed in FreeBSD 13): drm2 drivers drmn0: <Intel Haswell (ULT GT2 mobile)> on vgapci0 info: [drm] Memory usable by graphics device = 2048M info: [drm] MTRR allocation failed. Graphics performance may suffer. intel_iicbb0 on drmn0 iicbus0: <Philips I2C bus>error: [drm:pid1805:i915_write32] *ERROR* Unknown unclaimed register before writing to c5100 on iicbb0 addr 0xff iic0: <I2C generic I/O> on iicbus0 iicbus1: <Philips I2C bus> on intel_gmbus0 iic1: <I2C generic I/O> on iicbus1 intel_iicbb1 on drmn0 iicbus2: <Philips I2C bus> on iicbb1 addr 0xff iic2: <I2C generic I/O> on iicbus2 iicbus3: <Philips I2C bus> on intel_gmbus1 iic3: <I2C generic I/O> on iicbus3 intel_iicbb2 on drmn0 iicbus4: <Philips I2C bus> on iicbb2 addr 0xff iic4: <I2C generic I/O> on iicbus4 iicbus5: <Philips I2C bus> on intel_gmbus2 iic5: <I2C generic I/O> on iicbus5 intel_iicbb3 on drmn0 iicbus6: <Philips I2C bus> on iicbb3 addr 0xff iic6: <I2C generic I/O> on iicbus6 iicbus7: <Philips I2C bus> on intel_gmbus3 iic7: <I2C generic I/O> on iicbus7 intel_iicbb4 on drmn0 iicbus8: <Philips I2C bus> on iicbb4 addr 0xff iic8: <I2C generic I/O> on iicbus8 iicbus9: <Philips I2C bus> on intel_gmbus4 iic9: <I2C generic I/O> on iicbus9 intel_iicbb5 on drmn0 iicbus10: <Philips I2C bus> on iicbb5 addr 0xff iic10: <I2C generic I/O> on iicbus10 iicbus11: <Philips I2C bus> on intel_gmbus5 iic11: <I2C generic I/O> on iicbus11 info: [drm] MSI enabled 1 message(s) info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). info: [drm] Driver supports precise vblank timestamp query. drm_iic_dp_aux0 on drmn0 drm_iic_dp_aux1 on drmn0 drm_iic_dp_aux2 on drmn0 drmn0: taking over the fictitious range 0xe0000000-0xf0000000 info: [drm] Connector eDP-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.eDP-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector HDMI-A-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.HDMI-A-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector DP-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.DP-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector HDMI-A-2: get mode from tunables: info: [drm] - kern.vt.fb.modes.HDMI-A-2 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector DP-2: get mode from tunables: info: [drm] - kern.vt.fb.modes.DP-2 info: [drm] - kern.vt.fb.default_mode info: [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 fbd0 on drmn0 VT: Replacing driver "vga" with new "fb". info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0 info: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off ugen0.6: <PixArt HP USB Optical Mouse> at usbus0 ums0 on uhub1 ums0: <PixArt HP USB Optical Mouse, class 0/0, rev 2.00/1.00, addr 5> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=0 uhub0: at usbus1, port 1, addr 1 (disconnected) ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 (disconnected) uhub2: at uhub0, port 1, addr 2 (disconnected) uhub2: detached wlan0: link state changed to DOWN uhub1: at usbus0, port 1, addr 1 (disconnected) ugen0.6: <PixArt HP USB Optical Mouse> at usbus0 (disconnected) ums0: at uhub1, port 2, addr 5 (disconnected) ums0: detached ugen0.2: <Sierra Wireless Inc. Sierra Wireless EM7345 4G LTE> at usbus0 (disconnected) cdce0: at uhub1, port 4, addr 1 (disconnected) cdce0: detached umodem0: at uhub1, port 4, addr 1 (disconnected) umodem0: detached ugen0.3: <vendor 0x138a product 0x0017> at usbus0 (disconnected) ugen0.4: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ubt0: at uhub1, port 7, addr 3 (disconnected) ubt0: detached ugen0.5: <J30E9S6SB Integrated Camera> at usbus0 (disconnected) error: [drm:pid31548:i915_write8] *ERROR* Unknown unclaimed register before writing to 3b4 pcib0: failed to set ACPI power state D2 on \134_SB_.PCI0: AE_BAD_PARAMETER acpi0: cleared fixed power button status error: [drm:pid31548:i915_write32] *ERROR* Unclaimed write to 70030 xhci0: Port routing mask set to 0xffffffff uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 info: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off uhub0: 13 ports with 13 removable, self powered uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen0.2: <PixArt HP USB Optical Mouse> at usbus0 ums0 on uhub0 ums0: <PixArt HP USB Optical Mouse, class 0/0, rev 2.00/1.00, addr 1> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=0 uhub1: 3 ports with 3 removable, self powered usb_alloc_device: set address 3 failed (USB_ERR_TIMEOUT, ignored) ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 uhub2 on uhub1 uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 uhub2: 8 ports with 8 removable, self powered wlan0: link state changed to UP usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_TIMEOUT ugen0.3: <Sierra Wireless Inc. Sierra Wireless EM7345 4G LTE> at usbus0 cdce0 on uhub0 cdce0: <Sierra Wireless EM7345 4G LTE (NCM)> on usbus0 ue0: <USB Ethernet> on cdce0 ue0: Ethernet address: ff:ff:ff:ff:ff:ff umodem0 on uhub0 umodem0: <Sierra Wireless EM7345 4G LTE> on usbus0 umodem0: data interface 3, has no CM over data, has break ugen0.4: <vendor 0x138a product 0x0017> at usbus0 ugen0.5: <vendor 0x8087 product 0x07dc> at usbus0 ubt0 on uhub0 ubt0: <vendor 0x8087 product 0x07dc, class 224/1, rev 2.00/0.01, addr 4> on usbus0 ugen0.6: <J30E9S6SB Integrated Camera> at usbus0 ugen0.3: <Sierra Wireless Inc. Sierra Wireless EM7345 4G LTE> at usbus0 (disconnected) cdce0: at uhub0, port 4, addr 2 (disconnected) cdce0: detached umodem0: at uhub0, port 4, addr 2 (disconnected) umodem0: detached ugen0.3: <Sierra Wireless Inc. Sierra Wireless EM7345 4G LTE> at usbus0 cdce0 on uhub0 cdce0: <Sierra Wireless EM7345 4G LTE (NCM)> on usbus0 ue0: <USB Ethernet> on cdce0 ue0: Ethernet address: ff:ff:ff:ff:ff:ff umodem0 on uhub0 umodem0: <Sierra Wireless EM7345 4G LTE> on usbus0 umodem0: data interface 3, has no CM over data, has break uhub1: at usbus1, port 1, addr 1 (disconnected) ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 (disconnected) uhub2: at uhub1, port 1, addr 2 (disconnected) uhub2: detached wlan0: link state changed to DOWN uhub0: at usbus0, port 1, addr 1 (disconnected) ugen0.2: <PixArt HP USB Optical Mouse> at usbus0 (disconnected) ums0: at uhub0, port 2, addr 1 (disconnected) ums0: detached ugen0.3: <Sierra Wireless Inc. Sierra Wireless EM7345 4G LTE> at usbus0 (disconnected) cdce0: at uhub0, port 4, addr 6 (disconnected) cdce0: detached umodem0: at uhub0, port 4, addr 6 (disconnected) umodem0: detached ugen0.4: <vendor 0x138a product 0x0017> at usbus0 (disconnected) ugen0.5: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ubt0: at uhub0, port 7, addr 4 (disconnected) ubt0: detached ugen0.6: <J30E9S6SB Integrated Camera> at usbus0 (disconnected) error: [drm:pid77321:i915_write8] *ERROR* Unknown unclaimed register before writing to 3b4 pcib0: failed to set ACPI power state D2 on \134_SB_.PCI0: AE_BAD_PARAMETER acpi0: cleared fixed power button status error: [drm:pid77321:i915_write32] *ERROR* Unclaimed write to 70030 xhci0: Port routing mask set to 0xffffffff uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 info: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off uhub0: 13 ports with 13 removable, self powered uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 ugen0.2: <PixArt HP USB Optical Mouse> at usbus0 ums0 on uhub0 ums0: <PixArt HP USB Optical Mouse, class 0/0, rev 2.00/1.00, addr 1> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=0 usb_alloc_device: set address 3 failed (USB_ERR_IOERROR, ignored) uhub1: 3 ports with 3 removable, self powered ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 uhub2 on uhub1 uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 uhub2: 8 ports with 8 removable, self powered usbd_setup_device_desc: getting device descriptor at addr 3 failed, USB_ERR_TIMEOUT ugen0.3: <Sierra Wireless Inc. Sierra Wireless EM7345 4G LTE> at usbus0 cdce0 on uhub0 cdce0: <Sierra Wireless EM7345 4G LTE (NCM)> on usbus0 ue0: <USB Ethernet> on cdce0 ue0: Ethernet address: ff:ff:ff:ff:ff:ff umodem0 on uhub0 umodem0: <Sierra Wireless EM7345 4G LTE> on usbus0 umodem0: data interface 3, has no CM over data, has break ugen0.4: <vendor 0x138a product 0x0017> at usbus0 ugen0.5: <vendor 0x8087 product 0x07dc> at usbus0 ubt0 on uhub0 ubt0: <vendor 0x8087 product 0x07dc, class 224/1, rev 2.00/0.01, addr 4> on usbus0 ugen0.6: <J30E9S6SB Integrated Camera> at usbus0 ugen0.3: <Sierra Wireless Inc. Sierra Wireless EM7345 4G LTE> at usbus0 (disconnected) cdce0: at uhub0, port 4, addr 2 (disconnected) cdce0: detached umodem0: at uhub0, port 4, addr 2 (disconnected) umodem0: detached ugen0.3: <Sierra Wireless Inc. Sierra Wireless EM7345 4G LTE> at usbus0 cdce0 on uhub0 cdce0: <Sierra Wireless EM7345 4G LTE (NCM)> on usbus0 ue0: <USB Ethernet> on cdce0 ue0: Ethernet address: ff:ff:ff:ff:ff:ff umodem0 on uhub0 umodem0: <Sierra Wireless EM7345 4G LTE> on usbus0 umodem0: data interface 3, has no CM over data, has break wlan0: link state changed to UP TCP: [172.217.23.228]:443 to [192.168.88.169]:57182 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.228]:443 to [192.168.88.169]:57183 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port Connection attempt to UDP 192.168.88.169:60428 from 192.168.88.1:53 Connection attempt to UDP 192.168.88.169:26454 from 192.168.88.1:53 Connection attempt to UDP 192.168.88.169:54853 from 192.168.88.1:53 Connection attempt to UDP 192.168.88.169:51078 from 192.168.88.1:53 Connection attempt to UDP 192.168.88.169:31290 from 192.168.88.1:53 Connection attempt to UDP 192.168.88.169:23013 from 192.168.88.1:53 vboxdrv: XXXXXXXXXXXXXXXX VMMR0.r0 vboxdrv: XXXXXXXXXXXXXXXX VBoxDDR0.r0 TCP: [172.217.23.202]:443 to [192.168.88.169]:20551 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.202]:443 to [192.168.88.169]:20551 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [81.27.197.73]:452 to [192.168.88.169]:34360 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [216.58.201.110]:443 to [192.168.88.169]:14703 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [216.58.201.110]:443 to [192.168.88.169]:14703 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [81.27.197.73]:444 to [192.168.88.169]:59725 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.228]:443 to [192.168.88.169]:62029 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.228]:443 to [192.168.88.169]:62029 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.228]:443 to [192.168.88.169]:61083 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.228]:443 to [192.168.88.169]:31393 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.228]:443 to [192.168.88.169]:62548 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.228]:443 to [192.168.88.169]:49036 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.228]:443 to [192.168.88.169]:43959 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.228]:443 to [192.168.88.169]:61755 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.228]:443 to [192.168.88.169]:61755 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.228]:443 to [192.168.88.169]:41238 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.228]:443 to [192.168.88.169]:23075 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.228]:443 to [192.168.88.169]:41238 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.228]:443 to [192.168.88.169]:23075 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.228]:443 to [192.168.88.169]:29239 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.228]:443 to [192.168.88.169]:17322 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.228]:443 to [192.168.88.169]:58269 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.228]:443 to [192.168.88.169]:56256 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.202]:443 to [192.168.88.169]:34949 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [216.58.201.110]:443 to [192.168.88.169]:25386 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [216.58.201.110]:443 to [192.168.88.169]:31600 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [216.58.201.110]:443 to [192.168.88.169]:48217 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [216.58.201.110]:443 to [192.168.88.169]:25386 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [216.58.201.110]:443 to [192.168.88.169]:31600 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [216.58.201.110]:443 to [192.168.88.169]:48217 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.234]:443 to [192.168.88.169]:30365 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.234]:443 to [192.168.88.169]:30365 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port uhub1: at usbus1, port 1, addr 1 (disconnected) ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 (disconnected) uhub2: at uhub1, port 1, addr 2 (disconnected) uhub2: detached wlan0: link state changed to DOWN uhub0: at usbus0, port 1, addr 1 (disconnected) ugen0.2: <PixArt HP USB Optical Mouse> at usbus0 (disconnected) ums0: at uhub0, port 2, addr 1 (disconnected) ums0: detached ugen0.3: <Sierra Wireless Inc. Sierra Wireless EM7345 4G LTE> at usbus0 (disconnected) cdce0: at uhub0, port 4, addr 6 (disconnected) cdce0: detached umodem0: at uhub0, port 4, addr 6 (disconnected) umodem0: detached ugen0.4: <vendor 0x138a product 0x0017> at usbus0 (disconnected) ugen0.5: <vendor 0x8087 product 0x07dc> at usbus0 (disconnected) ubt0: at uhub0, port 7, addr 4 (disconnected) ubt0: detached ugen0.6: <J30E9S6SB Integrated Camera> at usbus0 (disconnected) error: [drm:pid71714:i915_write8] *ERROR* Unknown unclaimed register before writing to 3b4 pcib0: failed to set ACPI power state D2 on \134_SB_.PCI0: AE_BAD_PARAMETER acpi0: cleared fixed power button status error: [drm:pid71714:i915_write32] *ERROR* Unclaimed write to 70030 xhci0: Port routing mask set to 0xffffffff uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 info: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off uhub0: 13 ports with 13 removable, self powered uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 Fatal trap 1: privileged instruction fault while in kernel mode cpuid = 0; apic id = 00 instruction pointer = 0x20:0xffffffff82f9a124 stack pointer = 0x28:0xfffffe00855c4530 frame pointer = 0x28:0xfffffe00855c4560 code segment = base 0x0, limit 0xfffff, type 0x1b = DPL 0, pres 1, long 1, def32 0, gran 1 processor eflags = interrupt enabled, resume, IOPL = 0 current process = 24743 (VirtualBox) trap number = 1 panic: privileged instruction fault cpuid = 0 time = 1567173750 KDB: stack backtrace: #0 0xffffffff80be78d7 at kdb_backtrace+0x67 #1 0xffffffff80b9b4b3 at vpanic+0x1a3 #2 0xffffffff80b9b303 at panic+0x43 #3 0xffffffff81074bff at trap_fatal+0x35f #4 0xffffffff8107404d at trap+0x6d #5 0xffffffff8104f625 at calltrap+0x8 #6 0xffffffff82f99a1d at _module_pnp_uhub_ums_devs+0xd695 #7 0xffffffff82fb2df4 at _module_pnp_uhub_ums_devs+0x26a6c #8 0xffffffff82a4bf3c at supdrvIOCtlFast+0x9c #9 0xffffffff82a5b36c at VBoxDrvFreeBSDIOCtl+0x5c #10 0xffffffff80a51a1d at devfs_ioctl+0xad #11 0xffffffff811f9cae at VOP_IOCTL_APV+0x7e #12 0xffffffff80c7a084 at vn_ioctl+0x1a4 #13 0xffffffff80a51fff at devfs_ioctl_f+0x1f #14 0xffffffff80c04e9d at kern_ioctl+0x26d #15 0xffffffff80c04bbe at sys_ioctl+0x15e #16 0xffffffff810756d9 at amd64_syscall+0x369 #17 0xffffffff8104ff0d at fast_syscall_common+0x101 Uptime: 56m49s (ada0:ahcich0:0:0:0): FLUSHCACHE48. ACB: ea 00 00 00 00 40 00 00 00 00 00 00 (ada0:ahcich0:0:0:0): CAM status: Command timeout (ada0:ahcich0:0:0:0): Error 5, Retries exhausted (ada0:ahcich0:0:0:0): Synchronize cache failed (ada0:ahcich0:0:0:0): IDLE_IMMEDIATE. ACB: e1 00 00 00 00 40 00 00 00 00 00 00 (ada0:ahcich0:0:0:0): CAM status: Command timeout (ada0:ahcich0:0:0:0): Error 5, Retries exhausted (ada0:ahcich0:0:0:0): Spin-down disk failed ---<<BOOT>>--- Copyright (c) 1992-2018 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 12.0-RELEASE-p10 GENERIC amd64 FreeBSD clang version 6.0.1 (tags/RELEASE_601/final 335540) (based on LLVM 6.0.1) VT(vga): resolution 640x480 CPU: Intel(R) Core(TM) i7-4600U CPU @ 2.10GHz (2693.82-MHz K8-class CPU) Origin="GenuineIntel" Id=0x40651 Family=0x6 Model=0x45 Stepping=1 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE> Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND> AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM> AMD Features2=0x21<LAHF,ABM> Structured Extended Features=0x27ab<FSGSBASE,TSCADJ,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG> XSAVE Features=0x1<XSAVEOPT> VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID TSC: P-state invariant, performance statistics real memory = 8589934592 (8192 MB) avail memory = 7956549632 (7587 MB) Event timer "LAPIC" quality 600 ACPI APIC Table: <LENOVO TP-GJ > FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 hardware threads FreeBSD/SMP Online: 1 package(s) x 2 core(s) random: unblocking device. ioapic0 <Version 2.0> irqs 0-39 on motherboard Launching APs: 1 Timecounter "TSC-low" frequency 1346912242 Hz quality 1000 random: entropy device external interface netmap: loaded module [ath_hal] loaded module_register_init: MOD_LOAD (vesa, 0xffffffff810f9a00, 0) error 19 random: registering fast source Intel Secure Key RNG random: fast provider: "Intel Secure Key RNG" kbd1 at kbdmux0 nexus0 vtvga0: <VT VGA driver> on motherboard cryptosoft0: <software crypto> on motherboard aesni0: <AES-CBC,AES-XTS,AES-GCM,AES-ICM> on motherboard acpi0: <LENOVO TP-GJ> on motherboard acpi_ec0: <Embedded Controller: GPE 0x25, ECDT> port 0x62,0x66 on acpi0 acpi0: Power Button (fixed) cpu0: <ACPI CPU> on acpi0 attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0 Timecounter "i8254" frequency 1193182 Hz quality 0 Event timer "i8254" frequency 1193182 Hz quality 100 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0 Timecounter "HPET" frequency 14318180 Hz quality 950 Event timer "HPET" frequency 14318180 Hz quality 550 Event timer "HPET1" frequency 14318180 Hz quality 440 Event timer "HPET2" frequency 14318180 Hz quality 440 Event timer "HPET3" frequency 14318180 Hz quality 440 Event timer "HPET4" frequency 14318180 Hz quality 440 Event timer "HPET5" frequency 14318180 Hz quality 440 Event timer "HPET6" frequency 14318180 Hz quality 440 atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0 atrtc0: registered as a time-of-day clock, resolution 1.000000s Event timer "RTC" frequency 32768 Hz quality 0 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0 acpi_lid0: <Control Method Lid Switch> on acpi0 acpi_button0: <Sleep Button> on acpi0 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0 pci0: <ACPI PCI bus> on pcib0 vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xf0000000-0xf03fffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0 vgapci0: Boot video device hdac0: <Intel Haswell HDA Controller> mem 0xf0630000-0xf0633fff irq 16 at device 3.0 on pci0 xhci0: <Intel Panther Point USB 3.0 controller> mem 0xf0620000-0xf062ffff irq 16 at device 20.0 on pci0 xhci0: 32 bytes context size, 64-bit DMA xhci0: Port routing mask set to 0xffffffff usbus0 on xhci0 usbus0: 5.0Gbps Super Speed USB v3.0 pci0: <simple comms> at device 22.0 (no driver attached) em0: <Intel(R) PRO/1000 Network Connection> port 0x3080-0x309f mem 0xf0600000-0xf061ffff,0xf063e000-0xf063efff irq 20 at device 25.0 on pci0 em0: attach_pre capping queues at 1 em0: using 1024 tx descriptors and 1024 rx descriptors em0: msix_init qsets capped at 1 em0: Unable to map MSIX table em0: Using an MSI interrupt em0: allocated for 1 tx_queues em0: allocated for 1 rx_queues em0: Ethernet address: 68:f7:28:61:fc:23 em0: netmap queues/slots: TX 1/1024, RX 1/1024 hdac1: <Intel Lynx Point-LP HDA Controller> mem 0xf0634000-0xf0637fff irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1 pci1: <unknown> at device 0.0 (no driver attached) pcib2: <ACPI PCI-PCI bridge> irq 18 at device 28.1 on pci0 pci2: <ACPI PCI bus> on pcib2 iwm0: <Intel(R) Dual Band Wireless AC 7260> mem 0xf0400000-0xf0401fff irq 17 at device 0.0 on pci2 ehci0: <Intel Lynx Point LP USB 2.0 controller USB> mem 0xf063d000-0xf063d3ff irq 23 at device 29.0 on pci0 usbus1: EHCI version 1.0 usbus1 on ehci0 usbus1: 480Mbps High Speed USB v2.0 isab0: <PCI-ISA bridge> at device 31.0 on pci0 isa0: <ISA bus> on isab0 ahci0: <Intel Lynx Point-LP AHCI SATA controller> port 0x30a8-0x30af,0x30b4-0x30b7,0x30a0-0x30a7,0x30b0-0x30b3,0x3060-0x307f mem 0xf063c000-0xf063c7ff irq 19 at device 31.2 on pci0 ahci0: AHCI v1.30 with 3 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI channel> at channel 0 on ahci0 acpi_tz0: <Thermal Zone> on acpi0 acpi_tz0: _CRT value is absurd, ignored (200.1C) atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0 atkbd0: <AT Keyboard> irq 1 on atkbdc0 kbd0 at atkbd0 atkbd0: [GIANT-LOCKED] psm0: <PS/2 Mouse> irq 12 on atkbdc0 psm0: [GIANT-LOCKED] psm0: model Generic PS/2 mouse, device ID 0 battery0: <ACPI Control Method Battery> on acpi0 battery1: <ACPI Control Method Battery> on acpi0 acpi_acad0: <AC Adapter> on acpi0 acpi_ibm0: <IBM ThinkPad ACPI Extras> on acpi0 coretemp0: <CPU On-Die Thermal Sensors> on cpu0 est0: <Enhanced SpeedStep Frequency Control> on cpu0 fuse-freebsd: version 0.4.4, FUSE ABI 7.8 ZFS filesystem version: 5 ZFS storage pool version: features support (5000) Timecounters tick every 1.000 msec hdacc0: <Intel Haswell HDA CODEC> at cad 0 on hdac0 hdaa0: <Intel Haswell Audio Function Group> at nid 1 on hdacc0 pcm0: <Intel Haswell (HDMI/DP 8ch)> at nid 3 on hdaa0 hdacc1: <Realtek ALC292 HDA CODEC> at cad 0 on hdac1 hdaa1: <Realtek ALC292 Audio Function Group> at nid 1 on hdacc1 pcm1: <Realtek ALC292 (Analog 2.0+HP/2.0)> at nid 20,21 and 26 on hdaa1 pcm2: <Realtek ALC292 (Internal Analog Mic)> at nid 18 on hdaa1 ugen1.1: <Intel EHCI root HUB> at usbus1 ugen0.1: <0x8086 XHCI root HUB> at usbus0 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1 uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0 ada0: <KINGSTON SUV500480G 003056RI> ACS-4 ATA SATA 3.x device ada0: Serial Number 50026B7682C95A8B ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes) ada0: Command Queueing enabled ada0: 457862MB (937703088 512 byte sectors) iwm0: hw rev 0x140, fw ver 17.352738.0, address e8:b1:fc:95:42:7d Trying to mount root from zfs:zroot/ROOT/default []... GEOM_MIRROR: Device mirror/swap launched (1/1). GEOM_ELI: Device ada0p3.eli created. GEOM_ELI: Encryption: AES-XTS 256 GEOM_ELI: Crypto: hardware Root mount waiting for: usbus1 usbus0 uhub1: 13 ports with 13 removable, self powered Root mount waiting for: usbus1 usbus0 ugen0.2: <PixArt HP USB Optical Mouse> at usbus0 uhub0: 3 ports with 3 removable, self powered Root mount waiting for: usbus1 usbus0 ugen0.3: <Sierra Wireless Inc. Sierra Wireless EM7345 4G LTE> at usbus0 ugen1.2: <vendor 0x8087 product 0x8000> at usbus1 uhub2 on uhub0 uhub2: <vendor 0x8087 product 0x8000, class 9/0, rev 2.00/0.04, addr 2> on usbus1 uhub2: 8 ports with 8 removable, self powered ugen0.4: <vendor 0x138a product 0x0017> at usbus0 ugen0.5: <vendor 0x8087 product 0x07dc> at usbus0 Root mount waiting for: usbus0 ugen0.6: <J30E9S6SB Integrated Camera> at usbus0 Setting hostuuid: 01651626-8750-cb11-ab38-d0e864e39930. Setting hostid: 0x37b3bdee. Starting file system checks: Mounting local filesystems:. ELF ldconfig path: /lib /usr/lib /usr/lib/compat /usr/local/lib /usr/local/lib/compat /usr/local/lib/gcc9 /usr/local/lib/mysql /usr/local/lib/nss /usr/local/lib/opencollada /usr/local/lib/perl5/5.28/mach/CORE /usr/local/lib/qt5 /usr/local/lib/qtcreator /usr/local/lib/samba4 /usr/local/lib/samba4/private /usr/local/llvm60/lib /usr/local/llvm80/lib /usr/local/share/chromium /usr/local/share/electron 32-bit compatibility ldconfig path: /usr/lib32 /usr/local/lib32/compat Additional TCP/IP options: log_in_vain=1 drop SYN+FIN packets=YES. Setting up harvesting: PURE_RDRAND,[UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,NET_ETHER,NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED Feeding entropy: . wlan0: Ethernet address: e8:b1:fc:95:42:7d Created wlan(4) interfaces: wlan0. lo0: link state changed to UP Starting wpa_supplicant. Starting Network: lo0 em0 wlan0. lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384 options=680003<RXCSUM,TXCSUM,LINKSTATE,RXCSUM_IPV6,TXCSUM_IPV6> inet6 ::1 prefixlen 128 inet6 fe80::1%lo0 prefixlen 64 scopeid 0x2 inet 127.0.0.1 netmask 0xff000000 groups: lo nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL> em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 options=81249b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,LRO,WOL_MAGIC,VLAN_HWFILTER> ether 68:f7:28:61:fc:23 media: Ethernet autoselect status: no carrier nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> wlan0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether e8:b1:fc:95:42:7d groups: wlan ssid "" channel 1 (2412 MHz 11g) regdomain ETSI country CZ authmode WPA1+WPA2/802.11i privacy MIXED deftxkey UNDEF txpower 30 bmiss 10 scanvalid 60 protmode CTS wme roaming MANUAL bintval 0 media: IEEE 802.11 Wireless Ethernet autoselect (autoselect) status: no carrier nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> Starting devd. Autoloading module: uhid.ko Autoloading module: ums.ko ums0 on uhub1 ums0: <PixArt HP USB Optical Mouse, class 0/0, rev 2.00/1.00, addr 1> on usbus0 ums0: 3 buttons and [XYZ] coordinates ID=0 Autoloading module: if_cdce.ko cdce0 on uhub1 cdce0: <Sierra Wireless EM7345 4G LTE (NCM)> on usbus0 ue0: <USB Ethernet> on cdce0 ue0: Ethernet address: ff:ff:ff:ff:ff:ff Autoloading module: umodem.ko umodem0 on uhub1 umodem0: <Sierra Wireless EM7345 4G LTE> on usbus0 umodem0: data interface 3, has no CM over data, has break Autoloading module: ng_ubt.ko ubt0 on uhub1 ubt0: <vendor 0x8087 product 0x07dc, class 224/1, rev 2.00/0.01, addr 4> on usbus0 Autoloading module: ng_ubt.ko Starting ums0 moused. Autoloading module: if_cdce.ko Autoloading module: umodem.ko Autoloading module: ng_ubt.ko Autoloading module: ng_ubt.ko Starting Network: ue0. ue0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500 ether ff:ff:ff:ff:ff:ff nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL> Autoloading module: umodem.ko Autoloading module: ng_ubt.ko Autoloading module: ng_ubt.ko Autoloading module: ng_ubt.ko Autoloading module: ng_ubt.ko WARNING: attempt to domain_add(bluetooth) after domainfinalize() WARNING: attempt to domain_add(netgraph) after domainfinalize() Starting pflog. pflog0: promiscuous mode enabled Enabling pf2019-08-30T16:04:34.352557+02:00 pflogd 2101 - - [priv]: msg PRIV_OPEN_LOG received . add host 127.0.0.1: gateway lo0 fib 0: route already in table Additional inet routing options: ignore ICMP redirect=YES log ICMP redirect=YES. add host ::1: gateway lo0 fib 0: route already in table add net fe80::: gateway ::1 add net ff02::: gateway ::1 add net ::ffff:0.0.0.0: gateway ::1 add net ::0.0.0.0: gateway ::1 Waiting 30s for the default route interface: .....(no carrier) Creating and/or trimming log files. Starting syslogd. No core dumps found. Clearing /tmp. Updating motd:. Mounting late filesystems:. Starting powerd. Starting default moused. Starting dbus. Starting hald. Starting slim. mate-session - MATE mate-session - MATE Configuring vt: blanktime. Starting cron. Starting background file system checks in 60 seconds. Fri Aug 30 16:04:41 CEST 2019 info: [drm] Initialized drm 1.1.0 20060810 drmn0: ======================================================= drmn0: This code is obsolete abandonware. Install the graphics/drm-legacy-kmod pkg drmn0: ======================================================= drmn0: Deprecated code (to be removed in FreeBSD 13): drm2 drivers drmn0: ======================================================= drmn0: This code is obsolete abandonware. Install the graphics/drm-legacy-kmod pkg drmn0: ======================================================= drmn0: Deprecated code (to be removed in FreeBSD 13): drm2 drivers drmn0: <Intel Haswell (ULT GT2 mobile)> on vgapci0 info: [drm] Memory usable by graphics device = 2048M info: [drm] MTRR allocation failed. Graphics performance may suffer. intel_iicbb0 on drmn0 iicbus0: <Philips I2C bus>error: [drm:pid17630:i915_write32] *ERROR* Unknown unclaimed register before writing to c5100 on iicbb0 addr 0xff iic0: <I2C generic I/O> on iicbus0 iicbus1: <Philips I2C bus> on intel_gmbus0 iic1: <I2C generic I/O> on iicbus1 intel_iicbb1 on drmn0 iicbus2: <Philips I2C bus> on iicbb1 addr 0xff iic2: <I2C generic I/O> on iicbus2 iicbus3: <Philips I2C bus> on intel_gmbus1 iic3: <I2C generic I/O> on iicbus3 intel_iicbb2 on drmn0 iicbus4: <Philips I2C bus> on iicbb2 addr 0xff iic4: <I2C generic I/O> on iicbus4 iicbus5: <Philips I2C bus> on intel_gmbus2 iic5: <I2C generic I/O> on iicbus5 intel_iicbb3 on drmn0 iicbus6: <Philips I2C bus> on iicbb3 addr 0xff iic6: <I2C generic I/O> on iicbus6 iicbus7: <Philips I2C bus> on intel_gmbus3 iic7: <I2C generic I/O> on iicbus7 intel_iicbb4 on drmn0 iicbus8: <Philips I2C bus> on iicbb4 addr 0xff iic8: <I2C generic I/O> on iicbus8 iicbus9: <Philips I2C bus> on intel_gmbus4 iic9: <I2C generic I/O> on iicbus9 intel_iicbb5 on drmn0 iicbus10: <Philips I2C bus> on iicbb5 addr 0xff iic10: <I2C generic I/O> on iicbus10 iicbus11: <Philips I2C bus> on intel_gmbus5 iic11: <I2C generic I/O> on iicbus11 info: [drm] MSI enabled 1 message(s) info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). info: [drm] Driver supports precise vblank timestamp query. drm_iic_dp_aux0 on drmn0 drm_iic_dp_aux1 on drmn0 drm_iic_dp_aux2 on drmn0 drmn0: taking over the fictitious range 0xe0000000-0xf0000000 info: [drm] Connector eDP-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.eDP-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector HDMI-A-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.HDMI-A-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector DP-1: get mode from tunables: info: [drm] - kern.vt.fb.modes.DP-1 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector HDMI-A-2: get mode from tunables: info: [drm] - kern.vt.fb.modes.HDMI-A-2 info: [drm] - kern.vt.fb.default_mode info: [drm] Connector DP-2: get mode from tunables: info: [drm] - kern.vt.fb.modes.DP-2 info: [drm] - kern.vt.fb.default_mode info: [drm] GMBUS [i915 gmbus dpb] timed out, falling back to bit banging on pin 5 fbd0 on drmn0 VT: Replacing driver "vga" with new "fb". info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0 info: [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off wlan0: link state changed to UP pid 31048 (firefox), uid 1001: exited on signal 11 (core dumped) TCP: [216.58.201.99]:443 to [192.168.88.169]:30773 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [216.58.201.99]:443 to [192.168.88.169]:32886 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.206]:443 to [192.168.88.169]:16637 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.206]:443 to [192.168.88.169]:16637 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.202]:443 to [192.168.88.169]:16670 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.202]:443 to [192.168.88.169]:16671 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.202]:443 to [192.168.88.169]:16670 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.202]:443 to [192.168.88.169]:16671 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [216.58.201.74]:443 to [192.168.88.169]:41064 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [143.204.101.104]:443 to [192.168.88.169]:15976 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [143.204.101.104]:443 to [192.168.88.169]:32250 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [216.58.201.98]:443 to [192.168.88.169]:15988 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.194]:443 to [192.168.88.169]:15997 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.194]:443 to [192.168.88.169]:15998 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.194]:443 to [192.168.88.169]:15997 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.194]:443 to [192.168.88.169]:15998 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [13.32.158.144]:443 to [192.168.88.169]:65298 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [13.32.158.144]:443 to [192.168.88.169]:46692 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port pid 39041 (ext4fuse), uid 1001: exited on signal 6 (core dumped) TCP: [96.47.72.84]:443 to [192.168.88.169]:44408 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [185.199.110.154]:443 to [192.168.88.169]:52728 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [185.199.110.154]:443 to [192.168.88.169]:36749 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port pid 69255 (conftest), uid 0: exited on signal 11 (core dumped) TCP: [185.199.109.154]:443 to [192.168.88.169]:40586 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [185.199.109.154]:443 to [192.168.88.169]:40585 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [104.18.42.75]:443 to [192.168.88.169]:12683 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [104.18.42.75]:443 to [192.168.88.169]:38857 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [216.58.201.78]:443 to [192.168.88.169]:50197 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port Connection attempt to UDP 192.168.88.169:123 from 212.111.30.190:123 TCP: [81.27.197.73]:443 to [192.168.88.169]:45905 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [81.27.197.73]:443 to [192.168.88.169]:40067 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [81.27.197.73]:443 to [192.168.88.169]:45905 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [81.27.197.73]:443 to [192.168.88.169]:48328 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [81.27.197.73]:443 to [192.168.88.169]:55536 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [81.27.197.73]:443 to [192.168.88.169]:40067 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [81.27.197.73]:443 to [192.168.88.169]:62061 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [81.27.197.73]:443 to [192.168.88.169]:56010 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [81.27.197.73]:443 to [192.168.88.169]:29012 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [81.27.197.73]:443 to [192.168.88.169]:48328 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [81.27.197.73]:443 to [192.168.88.169]:19820 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [81.27.197.73]:443 to [192.168.88.169]:55536 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [81.27.197.73]:443 to [192.168.88.169]:62061 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [81.27.197.73]:443 to [192.168.88.169]:56010 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [81.27.197.73]:443 to [192.168.88.169]:29012 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [81.27.197.73]:443 to [192.168.88.169]:19820 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port pid 18432 (conftest), uid 0: exited on signal 11 (core dumped) TCP: [172.217.23.228]:443 to [192.168.88.169]:24509 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port TCP: [172.217.23.228]:443 to [192.168.88.169]:33990 tcpflags 0x12<SYN,ACK>; tcp_input: Connection attempt to closed port