---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 r353709: Fri Oct 18 05:49:35 UTC 2019
    root@releng1.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 9.0.0 (tags/RELEASE_900/final 372316) (based on LLVM 9.0.0)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 2560x1440
CPU: Intel(R) Core(TM) i7-8665U CPU @ 1.90GHz (2112.09-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x806ec  Family=0x6  Model=0x8e  Stepping=12
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbff<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x29c6fbf<FSGSBASE,TSCADJ,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
  Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 17179869184 (16384 MB)
avail memory = 16184000512 (15434 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-N2H  >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 1 7 4 2 3 5 6
Timecounter "TSC" frequency 2112085976 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000050 [4335] netmap_init               netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8105a240, 0) error 19
[ath_hal] loaded
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
acpi0: <LENOVO TP-N2H>
Firmware Error (ACPI): Could not resolve symbol [\134_SB.PCI0.RP14.PXSX.WIST], AE_NOT_FOUND (20190703/psargs-503)
ACPI Error: Skipping While/If block (20190703/psloop-569)
acpi_ec0: <Embedded Controller: GPE 0x16, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
unknown: memory range not supported
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x2000-0x203f mem 0xe9000000-0xe9ffffff,0xc0000000-0xcfffffff at device 2.0 on pci0
vgapci0: Boot video device
pci0: <simple comms, UART> at device 19.0 (no driver attached)
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xea220000-0xea22ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <memory, RAM> at device 20.2 (no driver attached)
pci0: <network> at device 20.3 (no driver attached)
pci0: <serial bus> at device 21.0 (no driver attached)
pci0: <serial bus> at device 21.1 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 29.0 on pci0
pci1: <ACPI PCI bus> on pcib1
nvme0: <Generic NVMe Device> mem 0xea100000-0xea103fff,0xea104000-0xea1040ff at device 0.0 on pci1
pcib2: <ACPI PCI-PCI bridge> at device 29.4 on pci0
pcib2: [GIANT-LOCKED]
pci2: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci2
pci3: <ACPI PCI bus> on pcib3
pcib4: <PCI-PCI bridge> at device 0.0 on pci3
pci4: <PCI bus> on pcib4
pcib5: <PCI-PCI bridge> at device 1.0 on pci3
pcib5: [GIANT-LOCKED]
pcib6: <ACPI PCI-PCI bridge> at device 2.0 on pci3
pci5: <ACPI PCI bus> on pcib6
xhci1: <XHCI (generic) USB 3.0 controller> mem 0xdc000000-0xdc00ffff at device 0.0 on pci5
xhci1: 32 bytes context size, 64-bit DMA
usbus1 on xhci1
usbus1: 5.0Gbps Super Speed USB v3.0
pcib7: <PCI-PCI bridge> at device 4.0 on pci3
pcib7: [GIANT-LOCKED]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
hdac0: <Intel Cannon Lake HDA Controller> mem 0xea23c000-0xea23ffff,0xea000000-0xea0fffff at device 31.3 on pci0
pci0: <serial bus> at device 31.5 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection> mem 0xea200000-0xea21ffff at device 31.6 on pci0
em0: Using 1024 TX descriptors and 1024 RX descriptors
em0: Using an MSI interrupt
em0: Ethernet address: 98:fa:9b:33:43:a8
em0: netmap queues/slots: TX 1/1024, RX 1/1024
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
acpi_syscontainer0: <System Container> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atrtc0: <AT realtime clock> at port 0x70 irq 8 on isa0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
atrtc0: non-PNP ISA device will be removed from GENERIC in FreeBSD 12.
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
ugen1.1: <0x8086 XHCI root HUB> at usbus1
ugen0.1: <0x8086 XHCI root HUB> at usbus0
uhub0 on usbus1
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
uhub1 on usbus0
uhub1: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
nvd0: <WDC PC SN720 SDAQNTW-512G-1001> NVMe namespace
nvd0: 488386MB (1000215216 512 byte sectors)
hdacc0: <Realtek ALC285 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC285 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC285 (Analog 3.1/2.0)> at nid 20,23 and 25 on hdaa0
hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1
pcm1: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
Root mount waiting for: usbus1 usbus0
WARNING: WITNESS option enabled, expect reduced performance.
uhub0: 4 ports with 4 removable, self powered
uhub1: 18 ports with 18 removable, self powered
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.2: <CBM USB 2.0> at usbus0
umass0 on uhub1
umass0: <CBM USB 2.0, class 0/0, rev 2.00/1.00, addr 1> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x4100
umass0:0:0: Attached to scbus0
da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
da0: <CBM USB 2.0 5.00> Removable Direct Access SCSI-2 device
da0: Serial Number 08031501BA7B8303
da0: 40.000MB/s transfers
da0: 1004MB (2057216 512 byte sectors)
da0: quirks=0x2<NO_6_BYTE>
ugen0.3: <Wacom Co.,Ltd. Pen and multitouch sensor> at usbus0
Root mount waiting for: usbus0
ugen0.4: <Azurewave Integrated Camera> at usbus0
ugen0.5: <vendor 0x06cb product 0x00bd> at usbus0
Root mount waiting for: usbus0
ugen0.6: <vendor 0x8087 product 0x0aaa> at usbus0
mountroot: waiting for device /dev/ufs/FreeBSD_Install...
random: unblocking device.
lo0: link state changed to UP
wmt0 on uhub1
wmt0: <Multitouch> on usbus0
wmt0: 16 contacts and [C]. Report range [0:0] - [12372:6960]
wmt0: 10 feature report contactsuhid0 on uhub1
uhid0: <Pen> on usbus0