---<<BOOT>>---
Copyright (c) 1992-2019 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT #0 r353709: Fri Oct 18 05:49:35 UTC 2019
    root@releng1.nyi.freebsd.org:/usr/obj/usr/src/amd64.amd64/sys/GENERIC amd64
FreeBSD clang version 9.0.0 (tags/RELEASE_900/final 372316) (based on LLVM 9.0.0)
WARNING: WITNESS option enabled, expect reduced performance.
VT(efifb): resolution 1366x768
CPU: Intel(R) Core(TM) i5-8265U CPU @ 1.60GHz (1800.11-MHz K8-class CPU)
  Origin="GenuineIntel"  Id=0x806ec  Family=0x6  Model=0x8e  Stepping=12
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
  AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
  AMD Features2=0x121<LAHF,ABM,Prefetch>
  Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
  Structured Extended Features3=0xbc000400<MD_CLEAR,IBPB,STIBP,L1DFL,ARCH_CAP,SSBD>
  XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
  IA32_ARCH_CAPS=0x2b<RDCL_NO,IBRS_ALL,SKIP_L1DFL_VME>
  VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
  TSC: P-state invariant, performance statistics
real memory  = 34359738368 (32768 MB)
avail memory = 33139593216 (31604 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <LENOVO TP-R0Y  >
FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
random: registering fast source Intel Secure Key RNG
random: fast provider: "Intel Secure Key RNG"
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
ioapic0 <Version 2.0> irqs 0-119
Launching APs: 1 7 4 3 2 5 6
Timecounter "TSC" frequency 1800107885 Hz quality 1000
random: entropy device external interface
kbd1 at kbdmux0
000.000050 [4335] netmap_init               netmap: loaded module
module_register_init: MOD_LOAD (vesa, 0xffffffff8105a240, 0) error 19
[ath_hal] loaded
nexus0
efirtc0: <EFI Realtime Clock>
efirtc0: registered as a time-of-day clock, resolution 1.000000s
cryptosoft0: <software crypto>
acpi0: <LENOVO TP-R0Y>
acpi_ec0: <Embedded Controller: GPE 0x20, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 24000000 Hz quality 950
Event timer "HPET" frequency 24000000 Hz quality 550
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
atrtc0: registered as a time-of-day clock, resolution 1.000000s
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x3000-0x303f mem 0xa0000000-0xa0ffffff,0x90000000-0x9fffffff at device 2.0 on pci0
vgapci0: Boot video device
xhci0: <XHCI (generic) USB 3.0 controller> mem 0xa1400000-0xa140ffff at device 20.0 on pci0
xhci0: 32 bytes context size, 64-bit DMA
usbus0 on xhci0
usbus0: 5.0Gbps Super Speed USB v3.0
pci0: <memory, RAM> at device 20.2 (no driver attached)
pci0: <simple comms> at device 22.0 (no driver attached)
ahci0: <AHCI SATA controller> port 0x3080-0x3087,0x3088-0x308b,0x3060-0x307f mem 0xa141e000-0xa141ffff,0xa1428000-0xa14280ff,0xa1427000-0xa14277ff at device 23.0 on pci0
ahci0: AHCI v1.31 with 2 6Gbps ports, Port Multiplier not supported
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci1: <ACPI PCI bus> on pcib1
sdhci_pci0: <Generic SD HCI> mem 0xa1301000-0xa1301fff,0xa1300000-0xa13007ff at device 0.0 on pci1
sdhci_pci0: 1 slot(s) allocated
pcib2: <ACPI PCI-PCI bridge> at device 29.0 on pci0
pci2: <ACPI PCI bus> on pcib2
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0x2000-0x20ff mem 0xa1204000-0xa1204fff,0xa1200000-0xa1203fff at device 0.0 on pci2
re0: Using 1 MSI-X message
re0: ASPM disabled
re0: Chip rev. 0x50800000
re0: MAC rev. 0x00100000
miibus0: <MII bus> on re0
rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Using defaults for TSO: 65518/35/2048
re0: Ethernet address: 98:fa:9b:cd:4a:73
re0: netmap queues/slots: TX 1/256, RX 1/256
pcib3: <ACPI PCI-PCI bridge> at device 29.2 on pci0
pci3: <ACPI PCI bus> on pcib3
pci3: <network> at device 0.0 (no driver attached)
pci0: <simple comms> at device 30.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
hdac0: <Intel Cannon Lake HDA Controller> mem 0xa1418000-0xa141bfff,0xa1000000-0xa10fffff at device 31.3 on pci0
pci0: <serial bus> at device 31.5 (no driver attached)
acpi_button0: <Sleep Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Synaptics Touchpad, device ID 0
acpi_syscontainer0: <System Container> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
est0: <Enhanced SpeedStep Frequency Control> on cpu0
Timecounters tick every 1.000 msec
hdacc0: <Conexant (0x1f86) HDA CODEC> at cad 0 on hdac0
hdaa0: <Conexant (0x1f86) Audio Function Group> at nid 1 on hdacc0
ugen0.1: <0x8086 XHCI root HUB> at usbus0
pcm0: <Conexant (0x1f86) (Analog)> at nid 23 and 25 on hdaa0
pcm1: <Conexant (0x1f86) (Left Analog Headphones)> at nid 22 on hdaa0
hdacc1: <Intel Kaby Lake HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Kaby Lake Audio Function Group> at nid 1 on hdacc1
pcm2: <Intel Kaby Lake (HDMI/DP 8ch)> at nid 3 on hdaa1
uhub0 on usbus0
uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
cam_periph_alloc: attempt to re-allocate valid device pass1 rejected flags 0 refcount 3
passasync: Unable to attach new device due to status 0x6: CCB request was invalid
ada0 at ahcich1 bus 0 scbus0 target 0 lun 0
ada0: <WDC WD10SPZX-08Z10 05.01A05> ACS-3 ATA SATA 3.x device
ada0: Serial Number WD-WXR1A49J4AK8
ada0: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 953869MB (1953525168 512 byte sectors)
ada1 at ahcich2 bus 0 scbus1 target 0 lun 0
ada1: <SAMSUNG MZNLN256HAJQ-000L7 MVT25L6Q> ACS-3 ATA SATA 3.x device
ada1: Serial Number S3RZNX0M827825
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 512bytes)
ada1: Command Queueing enabled
ada1: 244198MB (500118192 512 byte sectors)
Trying to mount root from ufs:/dev/ufs/FreeBSD_Install [ro,noatime]...
WARNING: WITNESS option enabled, expect reduced performance.
uhub0: 18 ports with 18 removable, self powered
ugen0.2: <VIA Labs, Inc. USB2.0 Hub> at usbus0
uhub1 on uhub0
uhub1: <VIA Labs, Inc. USB2.0 Hub, class 9/0, rev 2.10/90.11, addr 1> on usbus0
Root mount waiting for: usbus0
uhub1: 4 ports with 4 removable, self powered
Root mount waiting for: usbus0
ugen0.3: <C-Media Electronics Inc. USB Audio Device> at usbus0
ugen0.4: <vendor 0x413c Dell KB216 Wired Keyboard> at usbus0
ukbd0 on uhub1
ukbd0: <vendor 0x413c Dell KB216 Wired Keyboard, class 0/0, rev 1.10/1.08, addr 3> on usbus0
kbd2 at ukbd0
Root mount waiting for: usbus0
ugen0.5: <Logitech USB Receiver> at usbus0
ukbd1 on uhub1
ukbd1: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 4> on usbus0
kbd3 at ukbd1
Root mount waiting for: usbus0
Root mount waiting for: usbus0
ugen0.6: <Generic USB3.0 Card Reader> at usbus0
umass0 on uhub0
umass0: <Generic USB3.0 Card Reader, class 0/0, rev 3.00/15.32, addr 5> on usbus0
umass0:  SCSI over Bulk-Only; quirks = 0x8100
umass0:2:0: Attached to scbus2
mountroot: waiting for device /dev/ufs/FreeBSD_Install...
(probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00 
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:20,0 (Invalid command operation code)
(probe0:umass-sim0:0:0:0): Error 22, Unretryable error
da0 at umass-sim0 bus 0 scbus2 target 0 lun 0
da0: <Generic STORAGE DEVICE 1532> Removable Direct Access SPC-4 SCSI device
da0: Serial Number 000000001532
da0: 400.000MB/s transfers
da0: 1938MB (3970048 512 byte sectors)
da0: quirks=0x3<NO_SYNC_CACHE,NO_6_BYTE>
random: unblocking device.
lo0: link state changed to UP
re0: link state changed to UP
uaudio0 on uhub1
uaudio0: <C-Media Electronics Inc. USB Audio Device, class 0/0, rev 1.10/1.00, addr 2> on usbus0
uaudio0: Play: 48000 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Play: 44100 Hz, 2 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Record: 48000 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: Record: 44100 Hz, 1 ch, 16-bit S-LE PCM format, 2x8ms buffer.
uaudio0: No MIDI sequencer.
pcm3: <USB audio> on uaudio0
uaudio0: HID volume keys found.
uhid0 on uhub1
uhid0: <vendor 0x413c Dell KB216 Wired Keyboard, class 0/0, rev 1.10/1.08, addr 3> on usbus0
ums0 on uhub1
ums0: <Logitech USB Receiver, class 0/0, rev 2.00/29.01, addr 4> on usbus0
ums0: 18 buttons and [XYZT] coordinates ID=2