Attachment 'acer-aspireone-zg5-dmesg.txt'
Download 1 Copyright (c) 1992-2016 The FreeBSD Project.
2 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
3 The Regents of the University of California. All rights reserved.
4 FreeBSD is a registered trademark of The FreeBSD Foundation.
5 FreeBSD 11.0-RELEASE-p1 #0 r306420: Thu Sep 29 03:40:55 UTC 2016
6 root@releng2.nyi.freebsd.org:/usr/obj/usr/src/sys/GENERIC i386
7 FreeBSD clang version 3.8.0 (tags/RELEASE_380/final 262564) (based on LLVM 3.8.0)
8 VT(vga): resolution 640x480
9 info: [drm] Initialized drm 1.1.0 20060810
10 CPU: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (1596.03-MHz 686-class CPU)
11 Origin="GenuineIntel" Id=0x106c2 Family=0x6 Model=0x1c Stepping=2
12 Features=0xbfe9fbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
13 Features2=0x40c39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,xTPR,PDCM,MOVBE>
14 AMD Features2=0x1<LAHF>
15 TSC: P-state invariant, performance statistics
16 real memory = 1610612736 (1536 MB)
17 avail memory = 1536872448 (1465 MB)
18 Event timer "LAPIC" quality 400
19 ACPI APIC Table: <INTEL Napa >
20 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
21 FreeBSD/SMP: 1 package(s) x 2 hardware threads
22 random: unblocking device.
23 ioapic0: Changing APIC ID to 4
24 ioapic0 <Version 2.0> irqs 0-23 on motherboard
25 random: entropy device external interface
26 kbd1 at kbdmux0
27 module_register_init: MOD_LOAD (vesa, 0xc1295360, 0) error 19
28 vtvga0: <VT VGA driver> on motherboard
29 cryptosoft0: <software crypto> on motherboard
30 acpi0: <INTEL Napa> on motherboard
31 acpi0: Power Button (fixed)
32 cpu0: <ACPI CPU> on acpi0
33 cpu1: <ACPI CPU> on acpi0
34 atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
35 atrtc0: Warning: Couldn't map I/O.
36 Event timer "RTC" frequency 32768 Hz quality 0
37 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
38 Timecounter "HPET" frequency 14318180 Hz quality 950
39 Event timer "HPET" frequency 14318180 Hz quality 450
40 Event timer "HPET1" frequency 14318180 Hz quality 440
41 Event timer "HPET2" frequency 14318180 Hz quality 440
42 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0
43 Timecounter "i8254" frequency 1193182 Hz quality 0
44 Event timer "i8254" frequency 1193182 Hz quality 100
45 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
46 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
47 acpi_ec0: <Embedded Controller: GPE 0x17> port 0x62,0x66 on acpi0
48 acpi_button0: <Power Button> on acpi0
49 acpi_lid0: <Control Method Lid Switch> on acpi0
50 acpi_button1: <Sleep Button> on acpi0
51 battery0: <ACPI Control Method Battery> on acpi0
52 acpi_acad0: <AC Adapter> on acpi0
53 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
54 ACPI Error: [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS (20160527/dsfield-233)
55 ACPI Error: Method parse/execution failed [\134_SB.PCI0._OSC] (Node 0xc6c32340), AE_ALREADY_EXISTS (20160527/psparse-559)
56 pcib0: _OSC failed: AE_ALREADY_EXISTS
57 pci0: <ACPI PCI bus> on pcib0
58 vgapci0: <VGA-compatible display> port 0x60c0-0x60c7 mem 0x78480000-0x784fffff,0x60000000-0x6fffffff,0x78500000-0x7853ffff irq 16 at device 2.0 on pci0
59 agp0: <Intel 945GME SVGA controller> on vgapci0
60 agp0: aperture size is 256M, detected 7932k stolen memory
61 drmn0: <Intel i945GME> on vgapci0
62 info: [drm] MTRR allocation failed. Graphics performance may suffer.
63 iicbus0: <Philips I2C bus> on iicbb0 addr 0xc2
64 iic0: <I2C generic I/O> on iicbus0
65 iic1: <I2C generic I/O> on iicbus1
66 iicbus2: <Philips I2C bus> on iicbb1 addr 0xc2
67 iic2: <I2C generic I/O> on iicbus2
68 iic3: <I2C generic I/O> on iicbus3
69 iicbus4: <Philips I2C bus> on iicbb2 addr 0xc2
70 iic4: <I2C generic I/O> on iicbus4
71 iic5: <I2C generic I/O> on iicbus5
72 iicbus6: <Philips I2C bus> on iicbb3 addr 0xc2
73 iic6: <I2C generic I/O> on iicbus6
74 iic7: <I2C generic I/O> on iicbus7
75 iicbus8: <Philips I2C bus> on iicbb4 addr 0xc2
76 iic8: <I2C generic I/O> on iicbus8
77 iic9: <I2C generic I/O> on iicbus9
78 iicbus10: <Philips I2C bus> on iicbb5 addr 0xc2
79 iic10: <I2C generic I/O> on iicbus10
80 iic11: <I2C generic I/O> on iicbus11
81 info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
82 info: [drm] Driver supports precise vblank timestamp query.
83 drmn0: taking over the fictitious range 0x60000000-0x70000000
84 info: [drm] initialized overlay support
85 info: [drm] Connector LVDS-1: get mode from tunables:
86 info: [drm] - kern.vt.fb.modes.LVDS-1
87 info: [drm] - kern.vt.fb.default_mode
88 info: [drm] Connector VGA-1: get mode from tunables:
89 info: [drm] - kern.vt.fb.modes.VGA-1
90 info: [drm] - kern.vt.fb.default_mode
91 fbd0 on drmn0
92 VT: Replacing driver "vga" with new "fb".
93 info: [drm] Initialized i915 1.6.0 20080730 for drmn0 on minor 0
94 vgapci0: Boot video device
95 vgapci1: <VGA-compatible display> mem 0x78400000-0x7847ffff at device 2.1 on pci0
96 hdac0: <Intel 82801G HDA Controller> mem 0x78540000-0x78543fff irq 16 at device 27.0 on pci0
97 pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
98 pcib1: [GIANT-LOCKED]
99 pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
100 pcib2: [GIANT-LOCKED]
101 pci1: <ACPI PCI bus> on pcib2
102 re0: <RealTek 810xE PCIe 10/100baseTX> port 0x3000-0x30ff mem 0x71010000-0x71010fff,0x71000000-0x7100ffff irq 17 at device 0.0 on pci1
103 re0: Using 1 MSI-X message
104 re0: turning off MSI enable bit.
105 re0: Chip rev. 0x24800000
106 re0: MAC rev. 0x00200000
107 miibus0: <MII bus> on re0
108 rlphy0: <RTL8201L 10/100 media interface> PHY 1 on miibus0
109 rlphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
110 re0: Using defaults for TSO: 65518/35/2048
111 re0: Ethernet address: 00:1e:68:be:44:c5
112 pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
113 pcib3: [GIANT-LOCKED]
114 pci2: <ACPI PCI bus> on pcib3
115 ath0: <Atheros 5424/2424> mem 0x75200000-0x7520ffff irq 18 at device 0.0 on pci2
116 ath0: AR2425 mac 14.2 RF5424 phy 7.0
117 ath0: 2GHz radio: 0x0000; 5GHz radio: 0x00a2
118 pcib4: <ACPI PCI-PCI bridge> at device 28.3 on pci0
119 pcib4: failed to allocate initial I/O port window: 0x1000-0x1fff
120 pcib4: [GIANT-LOCKED]
121 uhci0: <Intel 82801G (ICH7) USB controller USB-A> port 0x6080-0x609f irq 16 at device 29.0 on pci0
122 uhci0: LegSup = 0x2f00
123 usbus0 on uhci0
124 uhci1: <Intel 82801G (ICH7) USB controller USB-B> port 0x6060-0x607f irq 17 at device 29.1 on pci0
125 uhci1: LegSup = 0x2f00
126 usbus1 on uhci1
127 uhci2: <Intel 82801G (ICH7) USB controller USB-C> port 0x6040-0x605f irq 18 at device 29.2 on pci0
128 uhci2: LegSup = 0x2f00
129 usbus2 on uhci2
130 uhci3: <Intel 82801G (ICH7) USB controller USB-D> port 0x6020-0x603f irq 19 at device 29.3 on pci0
131 uhci3: LegSup = 0x2f00
132 usbus3 on uhci3
133 ehci0: <Intel 82801GB/R (ICH7) USB 2.0 controller> mem 0x78544400-0x785447ff irq 16 at device 29.7 on pci0
134 usbus4: EHCI version 1.0
135 usbus4 on ehci0
136 pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
137 pci3: <ACPI PCI bus> on pcib5
138 isab0: <PCI-ISA bridge> at device 31.0 on pci0
139 isa0: <ISA bus> on isab0
140 atapci0: <Intel ICH7M SATA150 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x60a0-0x60af irq 17 at device 31.2 on pci0
141 ata0: <ATA channel> at channel 0 on atapci0
142 ata1: <ATA channel> at channel 1 on atapci0
143 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
144 atkbd0: <AT Keyboard> irq 1 on atkbdc0
145 kbd0 at atkbd0
146 atkbd0: [GIANT-LOCKED]
147 psm0: <PS/2 Mouse> irq 12 on atkbdc0
148 psm0: [GIANT-LOCKED]
149 psm0: model Generic PS/2 mouse, device ID 0
150 pmtimer0 on isa0
151 orm0: <ISA Option ROM> at iomem 0xcf000-0xcffff pnpid ORM0000 on isa0
152 ppc0: parallel port not found.
153 est0: <Enhanced SpeedStep Frequency Control> on cpu0
154 est1: <Enhanced SpeedStep Frequency Control> on cpu1
155 Timecounters tick every 1.000 msec
156 nvme cam probe device init
157 hdacc0: <Realtek ALC268 HDA CODEC> at cad 0 on hdac0
158 hdaa0: <Realtek ALC268 Audio Function Group> at nid 1 on hdacc0
159 pcm0: <Realtek ALC268 (Analog 2.0+HP/2.0)> at nid 20,21 and 18 on hdaa0
160 pcm1: <Realtek ALC268 (Left Analog Mic)> at nid 24 on hdaa0
161 usbus0: 12Mbps Full Speed USB v1.0
162 usbus1: 12Mbps Full Speed USB v1.0
163 usbus2: 12Mbps Full Speed USB v1.0
164 usbus3: 12Mbps Full Speed USB v1.0
165 usbus4: 480Mbps High Speed USB v2.0
166 ugen4.1: <Intel> at usbus4
167 uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus4
168 ugen3.1: <Intel> at usbus3
169 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
170 ugen2.1: <Intel> at usbus2
171 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
172 ugen1.1: <Intel> at usbus1
173 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
174 ugen0.1: <Intel> at usbus0
175 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
176 uhub1: 2 ports with 2 removable, self powered
177 uhub2: 2 ports with 2 removable, self powered
178 uhub3: 2 ports with 2 removable, self powered
179 uhub4: 2 ports with 2 removable, self powered
180 ada0 at ata1 bus 0 scbus1 target 0 lun 0
181 ada0: <SSDPAMM0008G1 Ver2.I0H> ATA-5 device
182 ada0: Serial Number CVPA8284823U0
183 ada0: 66.700MB/s transfers (UDMA4, PIO 512bytes)
184 ada0: 7695MB (15761088 512 byte sectors)
185 SMP: AP CPU #1 Launched!
186 Timecounter "TSC" frequency 1596033696 Hz quality 1000
187 Trying to mount root from ufs:/dev/ada0p2 [rw]...
188 uhub0: 8 ports with 8 removable, self powered
189 wlan0: Ethernet address: 00:22:69:22:2b:58
190 ugen4.2: <SuYin> at usbus4
191 ugen0.2: <MOON> at usbus0
192 re0: link state changed to DOWN
193 wlan0: link state changed to UP
194 ums0: <MOON AND, class 0/0, rev 1.00/0.10, addr 2> on usbus0
195 ums0: 3 buttons and [XYZ] coordinates ID=0
196 wlan0: link state changed to DOWN
197 ath0: ath_legacy_rx_tasklet: sc_inreset_cnt > 0; skipping
198 wlan0: link state changed to UP
199 wlan0: link state changed to DOWN
200 wlan0: link state changed to UP
Attached Files
To refer to attachments on a page, use attachment:filename, as shown below in the list of files. Do NOT use the URL of the [get] link, since this is subject to change and can break easily.You are not allowed to attach a file to this page.