Attachment 'dumbbell-dmesg.out.txt'
Download 1 Copyright (c) 1992-2018 The FreeBSD Project.
2 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
3 The Regents of the University of California. All rights reserved.
4 FreeBSD is a registered trademark of The FreeBSD Foundation.
5 FreeBSD 12.0-CURRENT #17 r327810:328191M: Sat Jan 20 19:35:29 CET 2018
6 root@cassini.dumbbell.fr:/usr/obj/mnt/home/dumbbell/Projects/freebsd/src/SVN/head/amd64.amd64/sys/GENERIC amd64
7 FreeBSD clang version 5.0.1 (tags/RELEASE_501/final 320880) (based on LLVM 5.0.1)
8 WARNING: WITNESS option enabled, expect reduced performance.
9 VT(efifb): resolution 1920x1080
10 CPU: Intel(R) Core(TM) i7-7700HQ CPU @ 2.80GHz (2808.14-MHz K8-class CPU)
11 Origin="GenuineIntel" Id=0x906e9 Family=0x6 Model=0x9e Stepping=9
12 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
13 Features2=0x7ffafbbf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,SDBG,FMA,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,TSCDLT,AESNI,XSAVE,OSXSAVE,AVX,F16C,RDRAND>
14 AMD Features=0x2c100800<SYSCALL,NX,Page1GB,RDTSCP,LM>
15 AMD Features2=0x121<LAHF,ABM,Prefetch>
16 Structured Extended Features=0x29c67af<FSGSBASE,TSCADJ,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,NFPUSG,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PROCTRACE>
17 XSAVE Features=0xf<XSAVEOPT,XSAVEC,XINUSE,XSAVES>
18 VT-x: PAT,HLT,MTF,PAUSE,EPT,UG,VPID
19 TSC: P-state invariant, performance statistics
20 real memory = 17179869184 (16384 MB)
21 avail memory = 16398610432 (15638 MB)
22 Event timer "LAPIC" quality 600
23 ACPI APIC Table: <GBT GBTUACPI>
24 FreeBSD/SMP: Multiprocessor System Detected: 8 CPUs
25 FreeBSD/SMP: 1 package(s) x 4 core(s) x 2 hardware threads
26 random: unblocking device.
27 ioapic0 <Version 2.0> irqs 0-119 on motherboard
28 SMP: AP CPU #1 Launched!
29 SMP: AP CPU #7 Launched!
30 SMP: AP CPU #6 Launched!
31 SMP: AP CPU #2 Launched!
32 SMP: AP CPU #3 Launched!
33 SMP: AP CPU #4 Launched!
34 SMP: AP CPU #5 Launched!
35 Timecounter "TSC-low" frequency 1404067844 Hz quality 1000
36 random: entropy device external interface
37 netmap: loaded module
38 [ath_hal] loaded
39 module_register_init: MOD_LOAD (vesa, 0xffffffff80fc1240, 0) error 19
40 random: registering fast source Intel Secure Key RNG
41 random: fast provider: "Intel Secure Key RNG"
42 kbd1 at kbdmux0
43 nexus0
44 cryptosoft0: <software crypto> on motherboard
45 acpi0: <GBT GBTUACPI> on motherboard
46 Firmware Error (ACPI): Failure looking up [\134_SB.PCI0.RP04.PXSX._SB.PCI0.RP05.PXSX], AE_NOT_FOUND (20180105/dswload2-312)
47 ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20180105/psobject-371)
48 ACPI Error: Method parse/execution failed \134_SB.PCI0.RP04.PXSX, AE_NOT_FOUND (20180105/psparse-677)
49 Firmware Error (ACPI): Failure looking up [\134_SB.PCI0.RP08.PXSX._SB.PCI0.RP09.PXSX], AE_NOT_FOUND (20180105/dswload2-312)
50 ACPI Error: AE_NOT_FOUND, During name lookup/catalog (20180105/psobject-371)
51 ACPI Error: Method parse/execution failed \134_SB.PCI0.RP08.PXSX, AE_NOT_FOUND (20180105/psparse-677)
52 ACPI Error: No handler for Region [ECF2] (0xfffff80003b56a00) [EmbeddedControl] (20180105/evregion-288)
53 ACPI Error: Region EmbeddedControl (ID=3) has no handler (20180105/exfldio-428)
54 ACPI Error: Method parse/execution failed \134_SB.PCI0.LPCB.EC._REG, AE_NOT_EXIST (20180105/psparse-677)
55 acpi0: Power Button (fixed)
56 cpu0: <ACPI CPU> on acpi0
57 cpu1: <ACPI CPU> on acpi0
58 cpu2: <ACPI CPU> on acpi0
59 cpu3: <ACPI CPU> on acpi0
60 cpu4: <ACPI CPU> on acpi0
61 cpu5: <ACPI CPU> on acpi0
62 cpu6: <ACPI CPU> on acpi0
63 cpu7: <ACPI CPU> on acpi0
64 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
65 Timecounter "HPET" frequency 24000000 Hz quality 950
66 Event timer "HPET" frequency 24000000 Hz quality 550
67 atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
68 atrtc0: Warning: Couldn't map I/O.
69 atrtc0: registered as a time-of-day clock, resolution 1.000000s
70 Event timer "RTC" frequency 32768 Hz quality 0
71 attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
72 Timecounter "i8254" frequency 1193182 Hz quality 0
73 Event timer "i8254" frequency 1193182 Hz quality 100
74 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
75 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1808-0x180b on acpi0
76 acpi_ec0: <Embedded Controller: GPE 0x3> port 0x62,0x66 on acpi0
77 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
78 pci0: <ACPI PCI bus> on pcib0
79 pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
80 pci1: <ACPI PCI bus> on pcib1
81 vgapci0: <VGA-compatible display> port 0xe000-0xe07f mem 0xdc000000-0xdcffffff,0x90000000-0x9fffffff,0xa0000000-0xa1ffffff at device 0.0 on pci1
82 vgapci1: <VGA-compatible display> port 0xf000-0xf03f mem 0xdb000000-0xdbffffff,0x30000000-0x3fffffff at device 2.0 on pci0
83 vgapci1: Boot video device
84 xhci0: <Intel Sunrise Point USB 3.0 controller> mem 0xdd510000-0xdd51ffff at device 20.0 on pci0
85 xhci0: 32 bytes context size, 64-bit DMA
86 usbus0 on xhci0
87 usbus0: 5.0Gbps Super Speed USB v3.0
88 pci0: <simple comms> at device 22.0 (no driver attached)
89 pcib2: <ACPI PCI-PCI bridge> at device 28.0 on pci0
90 pci2: <ACPI PCI bus> on pcib2
91 re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F/G PCIe Gigabit Ethernet> port 0xd000-0xd0ff mem 0xdd404000-0xdd404fff,0xdd400000-0xdd403fff at device 0.0 on pci2
92 re0: Using 1 MSI-X message
93 re0: turning off MSI enable bit.
94 re0: ASPM disabled
95 re0: Chip rev. 0x54000000
96 re0: MAC rev. 0x00100000
97 miibus0: <MII bus> on re0
98 rgephy0: <RTL8251/8153 1000BASE-T media interface> PHY 1 on miibus0
99 rgephy0: none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
100 re0: Using defaults for TSO: 65518/35/2048
101 re0: Ethernet address: e0:d5:5e:2c:de:bd
102 re0: netmap queues/slots: TX 1/256, RX 1/256
103 pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
104 pci3: <ACPI PCI bus> on pcib3
105 pci3: <network> at device 0.0 (no driver attached)
106 pcib4: <ACPI PCI-PCI bridge> at device 28.4 on pci0
107 pci4: <ACPI PCI bus> on pcib4
108 pcib5: <ACPI PCI-PCI bridge> at device 29.0 on pci0
109 pci5: <ACPI PCI bus> on pcib5
110 nvme0: <Generic NVMe Device> mem 0xdd200000-0xdd203fff at device 0.0 on pci5
111 pcib6: <ACPI PCI-PCI bridge> at device 29.4 on pci0
112 pci6: <ACPI PCI bus> on pcib6
113 nvme1: <Generic NVMe Device> mem 0xdd100000-0xdd103fff at device 0.0 on pci6
114 isab0: <PCI-ISA bridge> at device 31.0 on pci0
115 isa0: <ISA bus> on isab0
116 pci0: <memory> at device 31.2 (no driver attached)
117 hdac0: <Intel Kabylake HDA Controller> mem 0xdd520000-0xdd523fff,0xdd500000-0xdd50ffff at device 31.3 on pci0
118 acpi_button0: <Sleep Button> on acpi0
119 acpi_button1: <Power Button> on acpi0
120 acpi_tz0: <Thermal Zone> on acpi0
121 acpi_tz1: <Thermal Zone> on acpi0
122 atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
123 atkbd0: <AT Keyboard> irq 1 on atkbdc0
124 kbd0 at atkbd0
125 atkbd0: [GIANT-LOCKED]
126 psm0: <PS/2 Mouse> irq 12 on atkbdc0
127 psm0: [GIANT-LOCKED]
128 psm0: model Elantech Touchpad, device ID 0
129 battery0: <ACPI Control Method Battery> on acpi0
130 acpi_acad0: <AC Adapter> on acpi0
131 acpi_lid0: <Control Method Lid Switch> on acpi0
132 acpi_button2: <Sleep Button> on acpi0
133 est0: <Enhanced SpeedStep Frequency Control> on cpu0
134 est1: <Enhanced SpeedStep Frequency Control> on cpu1
135 est2: <Enhanced SpeedStep Frequency Control> on cpu2
136 est3: <Enhanced SpeedStep Frequency Control> on cpu3
137 est4: <Enhanced SpeedStep Frequency Control> on cpu4
138 est5: <Enhanced SpeedStep Frequency Control> on cpu5
139 est6: <Enhanced SpeedStep Frequency Control> on cpu6
140 est7: <Enhanced SpeedStep Frequency Control> on cpu7
141 Timecounters tick every 1.000 msec
142 ugen0.1: <0x8086 XHCI root HUB> at usbus0
143 uhub0: <0x8086 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
144 nvd0: <THNSN5512GPU7 TOSHIBA> NVMe namespace
145 nvd0: 488386MB (1000215216 512 byte sectors)
146 nvd1: <Samsung SSD 960 PRO 512GB> NVMe namespace
147 nvd1: 488386MB (1000215216 512 byte sectors)
148 hdacc0: <Realtek ALC255 HDA CODEC> at cad 0 on hdac0
149 hdaa0: <Realtek ALC255 Audio Function Group> at nid 1 on hdacc0
150 pcm0: <Realtek ALC255 (Analog 2.0+HP/2.0)> at nid 20,33 and 18 on hdaa0
151 hdacc1: <Intel Kabylake HDA CODEC> at cad 2 on hdac0
152 hdaa1: <Intel Kabylake Audio Function Group> at nid 1 on hdacc1
153 pcm1: <Intel Kabylake (HDMI/DP 8ch)> at nid 3 on hdaa1
154 WARNING: WITNESS option enabled, expect reduced performance.
155 Trying to mount root from ufs:/dev/nvd0p7 [rw]...
156 efirtc0: registered as a time-of-day clock, resolution 1.000000s
157 iwm0: <Intel(R) Dual Band Wireless AC 8265> mem 0xdd300000-0xdd301fff at device 0.0 on pci3
158 iwm0: hw rev 0x230, fw ver 22.361476.0, address 88:b1:11:36:57:a9
159 [drm] Initialized
160 drmn1: <drmn> on vgapci1
161 vgapci1: child drmn1 requested pci_enable_io
162 vgapci1: child drmn1 requested pci_enable_io
163 [drm] Memory usable by graphics device = 4096M
164 [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
165 [drm] Driver supports precise vblank timestamp query.
166 i915/kbl_dmc_ver1_01.bin: could not load firmware image, error 2
167 [drm] Connector eDP-1: get mode from tunables:
168 [drm] - kern.vt.fb.modes.eDP-1
169 [drm] - kern.vt.fb.default_mode
170 [drm] Connector DP-1: get mode from tunables:
171 [drm] - kern.vt.fb.modes.DP-1
172 [drm] - kern.vt.fb.default_mode
173 [drm] GuC firmware load skipped
174 [drm] Initialized i915 1.6.0 20160919 for drmn on minor 0
175 VT: Replacing driver "efifb" with new "fb".
176 start FB_INFO:
177 type=11 height=1080 width=1920 depth=32
178 cmsize=16 size=8294400
179 pbase=0x30000000 vbase=0xfffff80030000000
180 name=drmn1 flags=0x0 stride=7680 bpp=32
181 cmap[0]=0 cmap[1]=7f0000 cmap[2]=7f00 cmap[3]=c4a000
182 end FB_INFO
183 drmn1: fb0: inteldrmfb frame buffer device
184 i915/kbl_dmc_ver1_01.bin: could not load firmware image, error 2
185 uhub0: 24 ports with 24 removable, self powered
186 [drm] Finished loading i915/kbl_dmc_ver1_01.bin (v1.1)
187 wlan0: Ethernet address: 88:b1:11:36:57:a9
188 re0: link state changed to DOWN
189 [drm] RC6 on
190 lagg0: link state changed to DOWN
191 ugen0.2: <27C40-06N20-L01S7615EJ HD WebCam> at usbus0
192 hdacc1: Unexpected unsolicited response with tag 63: ffffffff
193 hdacc1: Unexpected unsolicited response with tag 63: ffffffff
194 ugen0.3: <vendor 0x8087 product 0x0a2b> at usbus0
195 ugen0.4: <HOLTEK USB-HID Keyboard> at usbus0
196 ukbd0 on uhub0
197 ukbd0: <HOLTEK USB-HID Keyboard, class 0/0, rev 1.10/3.01, addr 3> on usbus0
198 kbd2 at ukbd0
199 wlan0: link state changed to UP
200 lagg0: link state changed to UP
201 ugen0.5: <Generic USB3.0-CRW> at usbus0
202 umass0 on uhub0
203 umass0: <Bulk-In, Bulk-Out, Interface> on usbus0
204 umass0: SCSI over Bulk-Only; quirks = 0x4000
205 umass0:0:0: Attached to scbus0
206 (probe0:umass-sim0:0:0:0): REPORT LUNS. CDB: a0 00 00 00 00 00 00 00 00 10 00 00
207 (probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
208 (probe0:umass-sim0:0:0:0): SCSI status: Check Condition
209 (probe0:umass-sim0:0:0:0): SCSI sense: ILLEGAL REQUEST asc:24,0 (Invalid field in CDB)
210 (probe0:umass-sim0:0:0:0): Error 22, Unretryable error
211 da0 at umass-sim0 bus 0 scbus0 target 0 lun 0
212 da0: <Generic- SD/MMC 1.00> Removable Direct Access SPC-4 SCSI device
213 da0: Serial Number 20120501030900000
214 da0: 400.000MB/s transfers
215 da0: Attempt to query device size failed: NOT READY, Medium not present
216 da0: quirks=0x2<NO_6_BYTE>
217 re0: link state changed to UP
218 ubt0 on uhub0
219 ubt0: <vendor 0x8087 product 0x0a2b, class 224/1, rev 2.00/0.10, addr 2> on usbus0
220 uhid0 on uhub0
221 uhid0: <HOLTEK USB-HID Keyboard, class 0/0, rev 1.10/3.01, addr 3> on usbus0
222 uhid1 on uhub0
223 uhid1: <HOLTEK USB-HID Keyboard, class 0/0, rev 1.10/3.01, addr 3> on usbus0
224 uhid2 on uhub0
225 uhid2: <HOLTEK USB-HID Keyboard, class 0/0, rev 1.10/3.01, addr 3> on usbus0
226 WARNING: attempt to domain_add(bluetooth) after domainfinalize()
227 WARNING: attempt to domain_add(netgraph) after domainfinalize()
228 ubt0: ubt_ctrl_write_callback:782: control transfer failed: USB_ERR_TIMEOUT
229 ng_hci_process_command_timeout: ubt0hci - unable to complete HCI command OGF=0x3, OCF=0x3. Timeout
Attached Files
To refer to attachments on a page, use attachment:filename, as shown below in the list of files. Do NOT use the URL of the [get] link, since this is subject to change and can break easily.You are not allowed to attach a file to this page.