Describe martinfilla/orangei_zero here.
Booting [/boot/kernel/kernel]...
Using DTB provided by EFI at 0x47ef5000.
Kernel entry at 0x54e00200...
Kernel args: (null)
---<<BOOT>>---
GDB: debug ports: uart
GDB: current port: uart
KDB: debugger backends: ddb gdb
KDB: current backend: ddb
Copyright (c) 1992-2021 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 14.0-CURRENT #0 main-n245885-15dc713ceb5: Thu Apr 8 08:44:43 UTC 2021
root@releng1.nyi.freebsd.org:/usr/obj/usr/src/arm.armv7/sys/GENERIC arm
FreeBSD clang version 11.0.1 (git@github.com:llvm/llvm-project.git llvmorg-11.0.1-0-g43ff75f2c3fe)
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
CPU: ARM Cortex-A7 r0p5 (ECO: 0x00000000)
CPU Features:
Multiprocessing, Thumb2, Security, Virtualization, Generic Timer, VMSAv7,
PXN, LPAE, Coherent Walk
Optional instructions:
SDIV/UDIV, UMULL, SMULL, SIMD(ext)
LoUU:2 LoC:3 LoUIS:2
Cache level 1:
32KB/64B 4-way data cache WB Read-Alloc Write-Alloc
32KB/32B 2-way instruction cache Read-Alloc
Cache level 2:
512KB/64B 8-way unified cache WB Read-Alloc Write-Alloc
real memory = 536240128 (511 MB)
avail memory = 506937344 (483 MB)
No PSCI/SMCCC call function found
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
arc4random: WARNING: initial seeding bypassed the cryptographic random device because it was not yet seeded and the knob 'bypass_before_seeding' was enabled.
random: entropy device external interface
WARNING: Device "openfirm" is Giant locked and may be deleted before FreeBSD 14.0.
WARNING: Device "kbd" is Giant locked and may be deleted before FreeBSD 14.0.
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree>
ofw_clkbus0: <OFW clocks bus> on ofwbus0
clk_fixed0: <Fixed clock> on ofw_clkbus0
clk_fixed1: <Fixed clock> on ofw_clkbus0
simplebus0: <Flattened device tree simple bus> on ofwbus0
regfix0: <Fixed Regulator> on ofwbus0
regfix1: <Fixed Regulator> on ofwbus0
regfix2: <Fixed Regulator> on ofwbus0
regfix3: <Fixed Regulator> on ofwbus0
rtc0: <Allwinner RTC> mem 0x1f00000-0x1f003ff irq 45,46 on simplebus0
rtc0: registered as a time-of-day clock, resolution 1.000000s
ccu_h3ng0: <Allwinner H3/H5 Clock Control Unit NG> mem 0x1c20000-0x1c203ff on simplebus0
ccu_sun8i_r0: <Allwinner SUN8I_R Clock Control Unit NG> mem 0x1f01400-0x1f014ff on simplebus0
gic0: <ARM Generic Interrupt Controller> mem 0x1c81000-0x1c81fff,0x1c82000-0x1c83fff,0x1c84000-0x1c85fff,0x1c86000-0x1c87fff irq 42 on simplebus0
gic0: pn 0x1, arch 0x2, rev 0x1, implementer 0x43b irqs 160
gpio0: <Allwinner GPIO/Pinmux controller> mem 0x1c20800-0x1c20bff irq 23,24 on simplebus0
gpiobus0: <OFW GPIO bus> on gpio0
gpio1: <Allwinner GPIO/Pinmux controller> mem 0x1f02c00-0x1f02fff irq 49 on simplebus0
gpiobus1: <OFW GPIO bus> on gpio1
gpioregulator0: <GPIO controlled regulator> on ofwbus0
generic_timer0: <ARMv7 Generic Timer> irq 4,5,6,7 on ofwbus0
Timecounter "ARM MPCore Timecounter" frequency 24000000 Hz quality 1000
Event timer "ARM MPCore Eventtimer" frequency 24000000 Hz quality 1000
aw_syscon0: <Allwinner syscon> mem 0x1c00000-0x1c00fff on simplebus0
aw_sid0: <Allwinner Secure ID Controller> mem 0x1c14000-0x1c143ff on simplebus0
awusbphy0: <Allwinner USB PHY> mem 0x1c19400-0x1c1942b,0x1c1a800-0x1c1a803,0x1c1b800-0x1c1b803,0x1c1c800-0x1c1c803,0x1c1d800-0x1c1d803 on simplebus0
a31dmac0: <Allwinner DMA controller> mem 0x1c02000-0x1c02fff irq 8 on simplebus0
aw_mmc0: <Allwinner Integrated MMC/SD controller> mem 0x1c0f000-0x1c0ffff irq 10 on simplebus0
aw_mmc1: <Allwinner Integrated MMC/SD controller> mem 0x1c10000-0x1c10fff irq 11 on simplebus0
musbotg0: <Allwinner USB DRD> mem 0x1c19000-0x1c193ff irq 14 on simplebus0
musbotg0: setting phy mode 3
usbus0: Dynamic FIFO sizing detected, assuming 16Kbytes of FIFO RAM
usbus0 on musbotg0
ehci0: <Generic EHCI Controller> mem 0x1c1a000-0x1c1a0ff irq 15 on simplebus0
usbus1: EHCI version 1.0
usbus1 on ehci0
ohci0: <Generic OHCI Controller> mem 0x1c1a400-0x1c1a4ff irq 16 on simplebus0
usbus2 on ohci0
ehci1: <Generic EHCI Controller> mem 0x1c1b000-0x1c1b0ff irq 17 on simplebus0
usbus3: EHCI version 1.0
usbus3 on ehci1
ohci1: <Generic OHCI Controller> mem 0x1c1b400-0x1c1b4ff irq 18 on simplebus0
usbus4 on ohci1
gpioc0: <GPIO controller> on gpio0
awg0: <Allwinner Gigabit Ethernet> mem 0x1c30000-0x1c3ffff irq 27 on simplebus0
miibus0: <MII bus> on awg0
ukphy0: <Generic IEEE 802.3u media interface> PHY 0 on miibus0
ukphy0: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
ukphy1: <Generic IEEE 802.3u media interface> PHY 1 on miibus0
ukphy1: none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto, auto-flow
awg0: Ethernet address: 02:42:78:42:f3:cf
aw_wdog0: <Allwinner A31 Watchdog> mem 0x1c20ca0-0x1c20cbf irq 30 on simplebus0
uart0: console (115384,n,8,1)mem 0x1c28000-0x1c283ff irq 35 on simplebus0
gpioc1: <GPIO controller> on gpio1
aw_thermal0: <Allwinner Thermal Sensor Controller> mem 0x1c25000-0x1c253ff irq 60 on simplebus0
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
cpufreq_dt0: <Generic cpufreq driver> on cpu0
cpu1: <Open Firmware CPU> on cpulist0
cpu2: <Open Firmware CPU> on cpulist0
cpu3: <Open Firmware CPU> on cpulist0
pmu0: <Performance Monitoring Unit> irq 0,1,2,3 on ofwbus0
gpioled0: <GPIO LEDs> on ofwbus0
Timecounters tick every 1.000 msec
usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
Release APs
WARNING: WITNESS option enabled, expect reduced performance.
Trying to mount root from ufs:/dev/ufs/rootfs [rw]...
ugen3.1: <Generic EHCI root HUB> at usbus3
ugen1.1: <Generic EHCI root HUB> at usbus1
ugen0.1: <Mentor Graphics OTG Root HUB> at usbus0
uhub0ugen4.1: <Generic OHCI root HUB> at usbus4
on usbus3
uhub1 on usbus1
uhub2 on usbus0
uhub0: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
uhub1: <Generic EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub3 on usbus4
uhub2: <Mentor Graphics OTG Root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
uhub3: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
Root mount waiting for:ugen2.1: <Generic OHCI root HUB> at usbus2
usbus0uhub4 usbus1 on usbus2
usbus2uhub4: <Generic OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
usbus3 usbus4
uhub3: 1 port with 1 removable, self powered
uhub4: 1 port with 1 removable, self powered
uhub2: 1 port with 1 removable, self powered
mmc0: <MMC/SD bus> on aw_mmc1
mmc0: No compatible cards found on bus
aw_mmc1: Spurious interrupt - no active request, rint: 0x00000004
mmc1: <MMC/SD bus> on aw_mmc0
mmcsd0: 8GB <SDHC SL08G 8.0 SN 35AAEDF1 MFG 06/2015 by 3 SD> at mmc1 50.0MHz/4bit/32768-block
mmc1: Failed to set VCCQ for card at relative address 43690
uhub0: 1 port with 1 removable, self powered
uhub1: 1 port with 1 removable, self powered
mountroot: waiting for device /dev/ufs/rootfs...
No suitable dump device was found.
Growing root partition to fill device
random: randomdev_wait_until_seeded unblock wait
random: unblocking device.
GEOM_PART: mmcsd0s2 was automatically resized.
Use `gpart commit mmcsd0s2` to save changes or `gpart undo mmcsd0s2` to revert them.
mmcsd0s2 resized
mmcsd0s2a resized
gpart: arg0 'ufs/rootfs': Invalid argument
super-block backups (for fsck_ffs -b #) at:
6402432, 7682880, 8963328, 10243776, 11524224, 12804672, 14085120, 15365568
/etc/rc: WARNING: hostid: unable to figure out a UUID from DMI data, generating a new one
Setting hostuuid: af878092-f668-11de-86ba-9b9181a4fa0d.
Setting hostid: 0x522a2dcf.
Starting file system checks:
/dev/ufs/rootfs: FILE SYSTEM CLEAN; SKIPPING CHECKS
/dev/ufs/rootfs: clean, 1365286 free (238 frags, 170631 blocks, 0.0% fragmentation)
Mounting local filesystems:.
Setting up harvesting: [UMA],[FS_ATIME],SWI,INTERRUPT,NET_NG,[NET_ETHER],NET_TUN,MOUSE,KEYBOARD,ATTACH,CACHED
Feeding entropy: .
Setting hostname: generic.
Building /boot/kernel/linker.hints
ELF ldconfig path: /lib /usr/lib /usr/lib/compat
Soft Float compatibility ldconfig path:
lo0: link state changed to UP
awg0: link state changed to DOWN